The DOT report
Clicking Generate Report at the end of an inspection does two things at once: it locks the answers, and it saves a PDF report onto the service order.
Nothing exists before that click. If you are looking for a report and cannot find it, the first thing to check is whether the inspection was actually completed — see How to Run an Inspection From Start to Finish.
How do I print or download the report?
Open the inspection. Where the green Complete Inspection button used to be there is now a Report menu, top right. It has two options:
Print — opens your browser's print dialog. Print it for the driver.
Download — saves the PDF to your computer or phone.
The Report menu stays on the inspection for good, so you can print or download another copy whenever you need one.
1 = the Report button on a completed inspection. 2 = the Print and Download options.
What does the printed report look like?
The completed form: the company, the vehicle, the inspector, the date, and every item's result. Ready to hand to the driver or file with the customer's paperwork.
What is the report number, and do I have to enter one?
The Complete DOT Inspection window has a Report Number field and a Confirm the Report Number field. This is where you record the number that goes on the DOT sticker you put on the truck.
Both fields are optional. Leave them blank and the report still generates. If you do use them you have to type the number twice — the confirm field is there so a typo cannot end up on the record.
Once entered, the number shows as REPORT NUMBER on the finished inspection and on the service item summary. If you left it blank, that column simply is not there.
💡 Worth using. If you record the sticker number here, the sticker on the truck and the record in EasyTruckShop match — so six months later, when a customer or an inspector quotes a sticker number at you, you can find the report it belongs to.
Where is the report saved?
On the service order, under the Attachments tab. Completing the inspection creates the attachment for you — you do not upload anything.
The file is named after the service item, so on a job where the inspection is item 6 the attachment is called 6. DOT Inspection, dated the day it was generated. It is marked Private.
Note: The PDF only appears after the inspection has been completed. An unfinished inspection has no attachment.
Where is the report six months from now?
Still attached to that job, and reachable through the truck.
From the job: open the service → Attachments tab.
From the truck: Customers → Vehicles → select the vehicle → History → open the service → Attachments.
No filing cabinet, and no risk of the only copy walking out with the driver.
How do I email the report to the customer?
On the Attachments tab, open the ⋮ menu on the file. It gives you four things:
Download — save the PDF.
Change to Public — see below.
Email — send this file to the customer without leaving the screen.
Delete — remove the attachment.
There is also an Email button at the top of the Attachments tab for sending several files at once.
What is the difference between a Private and a Public attachment?
Every file on a service — the DOT report, and every photo your technician takes — is either Private or Public. It controls two things: what gets attached when you email the customer their invoice, and what the customer can see in the Customer Portal.
Private — this is how the DOT report is saved.
When you email the customer the invoice, private files are not attached automatically.
You can still attach them by hand on the email screen, right before you hit send.
The customer cannot see them in the Customer Portal.
Public
When you email the invoice, public files are attached automatically. You can untick any you do not want to send.
The customer can see them in the Customer Portal.
To switch a file over, open the ⋮ menu on it and choose Change to Public.
💡 Which should I use for DOT reports? If you want every customer to get their inspection report with the invoice without anyone having to remember, set it to Public. If you would rather decide case by case, leave it Private and attach it on the email screen when you want to. Either way nothing goes out by accident — you see the full list of attachments before the email is sent.
Can I correct a report that went out wrong?
Not the answers. Once Generate Report is clicked the 57 answers are locked permanently, for everybody.
The ⋮ menu on a completed DOT service item offers Edit, Create PM, Re-open and Delete. Re-open puts the service item back to Not Started so the job can carry on — it does not unlock the inspection, and the existing report is untouched.
The green date next to the item's name is the date the service item was completed. Click it to change it. That is the date the inspection job counts on in the mechanic Efficiency report. It is a separate date from the inspection DATE on the report, which you entered when you completed the inspection: in our test the inspection DATE was 10/22 and the item was completed on 10/23. See How do I change the service date, invoice date or completed date?.
If a finished report has the wrong information on it, message us from the chat bubble in the app with the service number.
Quick answers
"There is no report on the service." — The inspection was not completed. The PDF is only created when you click Generate Report.
"Do I have to enter a report number?" — No, it is optional. If you do, you type it twice and it then shows as REPORT NUMBER on the finished inspection.
"What number should I put in Report Number?" — The number on the DOT sticker you put on the truck.
"I emailed the invoice but the customer did not get the inspection report." — The report is Private, and private files are not attached automatically. Either attach it by hand on the email screen, or open the ⋮ menu on the file and choose Change to Public so it goes out every time.
"The customer says they cannot see the photos in the portal." — Those photos are Private. Only Public files show in the Customer Portal.
"I do not want the customer to see a photo." — Leave it Private. It stays internal and will not be attached to the invoice email unless you attach it yourself.
"The truck failed. Is there still a report?" — Yes. It prints with a Failed status and every failed item listed with its description. That is the document you quote the repair from.
"Can I delete a DOT report?" — You can delete the attachment from the ⋮ menu. That removes the PDF; it does not un-complete the inspection and it does not refund the charge.
"Can I get another copy of the report?" — Yes. Open the inspection and use Report → Print or Report → Download. The menu stays there permanently.
"How much am I charged for the report?" — $0.99 per finished report, added to your monthly payment.



