Who can run and complete a DOT inspection
DOT access has two halves, in two different places. Both need to be set for a user, or they will not be able to do the inspection.
The Inspectors list — Settings → Service Settings → DOT Inspection. This says who your shop treats as an inspector.
Two DOT permissions on the user — Settings → System → Users → open the user → Permissions → Services → Items. These say what that user is allowed to do.
Set both. Setting one and not the other is the usual reason a mechanic says the form will not open, or opens but will not let them finish.
Where is the Inspectors list?
Settings → Service Settings → DOT Inspection, in the Inspectors box. The page says it plainly: "Select which users can perform and complete DOT inspections."
Click Add a user…, pick the user, then click Save at the bottom of the page. The × next to a name takes them off the list again.
3 = the Inspectors box. (1 = the on/off toggle, 2 = DOT Service Templates, 4 = Save.)
The full setup page is covered in How to Set Up DOT Inspections.
What are the two DOT permissions on a user?
Go to Settings → System → Users, click the user, scroll to Permissions, open Services and look under the Items heading. The two toggles sit next to each other:
View and Edit DOT Inspections — the app describes it as "Create and edit DOT inspections." This is the one that lets a user open the inspection form and answer the items.
Complete DOT Inspections — the app describes it as "Mark DOT inspections as passed or failed." This is the one that lets a user finish the inspection and generate the report.
1 = View and Edit DOT Inspections and Complete DOT Inspections, under Permissions → Services → Items.
Each permission has its own article: Permission: View and Edit DOT Inspections and Permission: Complete DOT Inspections.
What does a user without DOT access actually see?
The Inspection Form button simply is not there. It is not greyed out and it does not show an error — the button is missing.
Everything else on the DOT service item looks normal to them. They can see the item, its STATUS counter, and on a finished one the DATE, INSPECTOR, STATUS and REPORT NUMBER. They just cannot open the form.
This is verified behaviour for a Mechanic who is not on the Inspectors list and has both DOT permissions off.
1 = a DOT service item as a user without DOT access sees it. The item, its 57/57 counter and the ordinary Complete button are all there — there is no Inspection Form button.
💡 So "there is no Inspection Form button" is almost always one of two things: the template is not on the DOT Service Templates list (nobody sees the button), or the user is missing DOT access (only that user does not see it). Check whether an Owner can see the button on the same job — that tells you which one it is.
Can I let a mechanic fill the form in but not sign it off?
Yes — that is exactly what the two permissions are for. Give the mechanic View and Edit DOT Inspections and leave Complete DOT Inspections off. They work down the 57 items at the truck; the owner or a senior tech does the final step, which is the one that names the inspector on the report and bills the report.
Who signs the report?
The Complete DOT Inspection window asks for an Inspection Date and an Inspector Name. The Inspector Name is picked from a list of your shop's users, so the report always goes out signed by a real person — and it does not have to be the person clicking the button. If the tech did the walk-around and the owner is finishing it off, pick the tech.
💡 The Inspector Name list is every user in your shop — not only the ones on the Inspectors list. So it is possible to name someone who is not set up as an inspector. Pick deliberately; the name you choose is the one printed on the report.
Does a mechanic need the Owner role to do DOT inspections?
No. A user with the Mechanic role can run and complete DOT inspections, as long as they are on the Inspectors list and have the two DOT permissions turned on. The role by itself does not decide it.
Subscribing to the add-on and changing these settings is different — for that you do need an Owner or admin, because only they see Settings → System → Subscription.
Quick answers
"My mechanic says there is no Inspection Form button." — Check, in this order: the template is on the DOT Service Templates list, the mechanic is on the Inspectors list, and the mechanic has View and Edit DOT Inspections turned on.
"Is the button greyed out for a user without access?" — No, it is not shown at all.
"My mechanic filled the form in but cannot finish it." — They are missing Complete DOT Inspections. Turn it on, or have someone who has it do the last step.
"Do I have to add every mechanic as an inspector?" — Only the ones who actually do inspections. Anyone else does not need to be on the list.
"Is being on the Inspectors list enough on its own?" — No. The user's two DOT permissions have to be on as well.
"Are the two DOT permissions on by default?" — Do not assume either way. Open the user and look at Permissions → Services → Items before you tell a mechanic it is set.
"I turned a permission on and it still does not work." — Have the user log out and back in, then try again. If it is still wrong, message us with the user's name and the service number.



