Skip to main content

DOT Inspections: How to Run an Inspection From Start to Finish

Add the DOT service item, work down the 57-item form on a phone, handle failures, and complete the inspection.

Written by Vladimir

Running a DOT inspection

Once DOT inspections are set up, running one is four steps: add the DOT service item, open the form, answer the items, complete it.

If the form is not appearing at all, the setup is not finished — see How to Set Up DOT Inspections.


How do I add a DOT inspection to a job?

Exactly like any other service item.

  1. Open the service order and go to the Service Items tab.

  2. Click + Service Item. The form opens as a COMPLAINT — click Change to Service.

  3. In the Service field ("Select the service"), type DOT and pick your DOT template from the list — for example DOT Inspection — 45 minutes.

  4. Click Save. You get the toast "Service Item Created!"

The rest of the work-order flow is the same as any job — see How to Create a New Service (Work Order).

Does the vehicle have to be checked in first?

No. The Inspection Form button is there as soon as the service item exists. You can add a DOT inspection to a job sitting in Upcoming that has never been checked in, and open and fill the form straight away.

Can I put more than one DOT inspection on the same work order?

Yes. A service order can carry several DOT inspection items, each with its own form, its own inspector and its own report. Useful when you inspect a tractor and a trailer on the same visit.


How do I open the inspection form?

A DOT service item looks different from a normal one. It shows a STATUS counter — how many of the checks have an answer, out of 57 — and a purple Inspection Form button next to Complete.

Click Inspection Form and the inspection opens.


What does the inspection form look like?

It is the full federal annual inspection list: 16 sections containing 57 items.

At the top you get the service number, the progress bar and a percentage — that is items answered ÷ 57. Above the sections there are two controls: Mark All OK on the left, and Collapse All / Expand All on the right.

Each section header shows its own counter, for example 0/13, and turns red with an n Failed badge as soon as something in it needs repair.

Use Collapse All to see the whole inspection at a glance, every section with its own score, so you can jump straight to whatever is not finished.

The 16 sections and how many items each one has

  • 1. Brake System — 13 items

  • 2. Coupling devices — 6 items

  • 3. Exhaust System — 3 items

  • 4. Fuel System — 3 items

  • 5. Lighting Devices — 1 item

  • 6. Safe Loading — 3 items

  • 7. Steering Mechanism — 10 items

  • 8. Suspension — 3 items

  • 9. Frame — 3 items

  • 10. Tires — 3 items

  • 11. Wheels and Rims — 4 items

  • 12. Windshield Glazing — 1 item

  • 13. Windshield Wipers — 1 item

  • 14. Motorcoach Seats — 1 item

  • 15. Rear Impact Guard — 2 items

  • 16. OTHER — no items

Section 16 OTHER has nothing in it. It shows 0/0 with a green tick from the start, and expanding it shows nothing. All 57 items live in sections 1 to 15, so OTHER never holds you back from reaching 100%.


What are the three answers on each item?

Every item gets one of three:

  • OK — you checked it and it passes.

  • N/A — this truck does not have that part. A day cab has no motorcoach seats; a straight truck has no coupling devices.

  • Needs Repair — it failed.

Each item also has a small ? icon that explains what the item covers.

💡 Use N/A only when the part is not on the truck. Do not use N/A for something you simply did not get to. An item left blank keeps the inspection under 100% and stops you signing off — which is the point.

Why does the form already show answers before I start?

Because N/A is remembered for that truck. When you open a new inspection on a vehicle that has been inspected here before, every item you marked N/A last time comes back pre-set to N/A.

So on a tractor that has been through before, a brand new inspection can open at something like 7 / 57 with sections such as 14 Motorcoach Seats and 15 Rear Impact Guard already showing a green tick. Nothing is wrong — those are the parts the truck does not have, remembered from last time. Check them and change any that are not right.


Is there a faster way than tapping 57 times?

Yes. Mark All OK answers every item that has no answer yet, in one click. You then change only the handful that are not OK. On a clean truck the inspection takes about as long as the walk-around itself.

It does not wipe out work you have already done. Mark All OK only fills in the blanks:

  • Items already marked Needs Repair stay Needs Repair.

  • Items already marked N/A stay N/A — including the ones remembered from the truck's last inspection.

So it is safe to walk the truck first, mark the failures as you find them, and hit Mark All OK at the end.


Can the technician fill in the DOT inspection on their phone?

Yes — that is the whole point. The technician opens the service on their phone, taps Inspection Form, and works down the list standing at the truck. Each item's three answers become a full-width row of big buttons, so it works with gloves on, and Complete Inspection sits full-width under the progress bar.

To put EasyTruckShop on the technician's phone, see How to Install EasyTruckShop as an App on Any Device.

The inspection form at phone width. 1 = Complete Inspection, full width under the progress bar. 2 = the three answers as a full-width row.


What happens when an item fails?

Choose Needs Repair and the Mark as Needs Repair window opens:

  • INSPECTION ITEM — the numbered item you are failing, for example 1.A. Service brakes.

  • Description — EasyTruckShop writes it for you as "Repair Service brakes." Replace it with what you actually found. This is the sentence the customer reads, so it is worth typing.

  • Repaired toggle — off to begin with.

  • Attach Files — pick a photo or document already on the device.

  • Camera — on a phone only, a second button next to Attach Files that opens the camera so the technician photographs the defect right there. On a computer you only get Attach Files.

  • Cancel / Save.

How do I photograph a defect?

On a phone, tap Camera inside the Mark as Needs Repair window and take the picture. It attaches to that failed item immediately — no emailing pictures to the office, no "which truck was that again?".

A photo of the actual defect is also the fastest way to get a customer to approve the repair.

The same window on a phone. 1 = Attach Files. 2 = Camera, which only appears on a phone.

Click Save and three things happen:

  • The item's Needs Repair answer is selected and outlined in red.

  • An amber Recommendation block appears under the item showing your description, with an Edit link and a Repaired toggle on the right.

  • The section header shows the failure, for example 1/13 with a red 1 Failed badge.

Where does that recommendation go?

Onto the service order. Scroll down the service's Service Items tab to the Recommendations list and it is there with a blue DOT badge, so you can tell at a glance which recommendations came out of the inspection and which were written by hand.

That is what makes a DOT inspection worth running as a job: every failed line is a repair described in writing, dated, photographed and attributed. See How do I send a service item back to Recommendations? for how recommendations behave once they are on the service.

Can I fix it and still pass the truck?

Yes. Repair it before the truck leaves and flip the Repaired toggle on that recommendation. That is what the toggle is for.


How do I finish the inspection?

When the form reaches 100%, a green Complete Inspection button appears at the top right. Click it and the Complete DOT Inspection window asks for four things — two required, two optional:

  • Inspection Date (required) — today's date is filled in for you.

  • Inspector Name (required) — picked from your shop's users, so the report is signed by a real person.

  • Report Number (optional) — the number you are putting on the DOT sticker.

  • Confirm the Report Number (optional) — type it a second time so a typo cannot get onto the record.

Then click Generate Report. It stays greyed out until Inspection Date and Inspector Name are both filled in. You can leave the report number blank — the report still generates.

1 = Inspection Date. 2 = Inspector Name. 3 = Report Number and Confirm the Report Number. 4 = Generate Report.

⚠️ Generate Report is the moment you are billed, and the answers lock. Once the report is generated the 57 answers can never be changed again — not by you, not by an Owner. Check the form before you click.


What does the inspection look like once it is done?

It becomes a clean read-only record. The radio buttons are gone and each item just shows its result — OK, N/A or Needs Repair — with any recommendation printed underneath.

The header now shows:

  • DATE — the inspection date you entered.

  • INSPECTOR — the name you picked.

  • STATUS — Passed if nothing needed repair, Failed if anything did.

  • REPORT NUMBER — only shown if you entered one.

  • A Report menu where the Complete Inspection button used to be, with Print and Download.

Back on the service order, the service item shows a green Completed badge and the same summary line. The report itself is saved to the service — see The DOT Report: Print, Download, Email and Where It Is Saved.

I made a mistake on a finished inspection — can I reopen it?

Partly, and it is worth understanding exactly what the option does.

The ⋮ menu on a completed DOT service item offers Edit, Create PM, Re-open and Delete.

The green date next to the item's name is the date the service item was completed. Click it to change it. That is the date the inspection job counts on in the mechanic Efficiency report. It is a separate date from the inspection DATE on the report, which you entered when you completed the inspection: in our test the inspection DATE was 10/22 and the item was completed on 10/23. See How do I change the service date, invoice date or completed date?.

Re-open puts the service item back to Not Started and brings its Complete button back, so the job can carry on. It does not unlock the inspection: the 57 answers stay read-only and the existing report stays exactly as it was.

Where are the date and the menu on a completed DOT item? In the picture below, 1 = the item's completed date, which you click to change it, 2 = the inspection DATE on the report, 3 = the ⋮ menu: Edit, Create PM, Re-open, Delete.

A completed DOT Inspection service item: 1 the green completed date 10/23/2026 next to the item's name, 2 the inspection DATE 10/22/2026, 3 the open three-dot menu showing Edit, Create PM, Re-open and Delete.

⚠️ Wrong answers on a generated report cannot be corrected. If a finished inspection went out with the wrong information, message us from the chat bubble in the app with the service number rather than trying to fix it yourself.


The whole flow, start to finish


Quick answers

"Does the truck have to be checked in before I can run the inspection?" — No. The Inspection Form button is there as soon as the service item exists, even on an Upcoming job.

"What does the number next to STATUS mean?" — How many of the 57 checks have an answer. It is not a pass rate.

"Why does it already say 7 of 57 before I start?" — Items you marked N/A on this truck's last inspection are remembered and pre-filled.

"Why can't I click Complete Inspection?" — The form is not at 100% yet. Collapse All and look for the section whose counter is short.

"Does Mark All OK overwrite my failures or my N/As?" — No. It only fills in items with no answer yet.

"Where is the camera?" — In the Mark as Needs Repair window, next to Attach Files. It only appears on a phone.

"Do I have to enter a report number?" — No, it is optional. If you do enter one you have to type it twice, and it then shows as REPORT NUMBER on the finished inspection.

"The truck failed. Can I still finish and hand the driver a report?" — Yes. Complete it as normal. The report comes out with a Failed status and every failed item listed with its description.

"Can I edit the answers after generating the report?" — No. They lock permanently. Re-open on the ⋮ menu reopens the service item, not the answers.

"Am I charged for an inspection I started but never finished?" — No. You are billed when the report is generated.

"Section 16 OTHER is empty — is something missing?" — No. OTHER has no items. All 57 are in sections 1 to 15.

"Can somebody else be named as the inspector?" — Yes. The Inspector Name field is a list of your shop's users, so whoever finishes the inspection can name the tech who actually did it.

"Can I run two DOT inspections on one work order?" — Yes, as many as you need. Each gets its own form and its own report.

"Is this the same form as my state's periodic inspection?" — The checklist is the federal annual inspection list. Some states run their own periodic programme on a different schedule, so check the form covers what your state asks for before you rely on it.

"Can the technician fill in the inspection on a phone?" — Yes. Open the service on the phone and tap Inspection Form.


Related articles

Did this answer your question?