DOT inspections: quick answers
Short answers. Each one links to the full article if you need the detail.
Setup and billing
"How do I turn DOT inspections on?" — Two steps. Subscribe under Settings → System → Subscription → Addons → DOT Inspections, then configure it under Settings → Service Settings → DOT Inspection. Full steps: How to Set Up DOT Inspections.
"I subscribed but nothing happened." — Subscribing on its own does nothing. You still have to add your DOT template to the DOT Service Templates list on the DOT Inspection settings page, and click Save.
"How much does a DOT inspection cost me?" — $0.99 per finished report, added to your monthly payment. Not per user, not per location.
"Do I get charged for an inspection I started but never finished?" — No. You are billed when you click Generate Report.
"I can't see Subscription in Settings." — Only an Owner or admin sees it. Ask the shop owner to do the subscribe step.
"Where did the DOT labor type setting go?" — It is no longer what switches the form on. Setting a template's Labor Type to DOT Inspection does nothing for DOT inspections now. Use the DOT Service Templates list instead.
"Can I have more than one DOT template?" — Yes. Add as many as you like to the DOT Service Templates list.
"What does the toggle at the top of the DOT Inspection settings page do?" — It switches DOT inspections on and off for the shop without unsubscribing from the add-on.
Who can do what
"Who can run a DOT inspection?" — A user who is on the Inspectors list (Settings → Service Settings → DOT Inspection) and has the DOT permissions on their own profile. Both halves are needed. Full detail: Who Can Run and Complete a DOT Inspection.
"What are the two DOT permissions?" — Under Settings → System → Users → the user → Permissions → Services → Items: View and Edit DOT Inspections ("Create and edit DOT inspections") and Complete DOT Inspections ("Mark DOT inspections as passed or failed").
"What does a user without DOT access see?" — No Inspection Form button at all. It is not greyed out and there is no error — the button is simply missing.
"Can a mechanic fill the form in but not sign it off?" — Yes. Give them View and Edit DOT Inspections and leave Complete DOT Inspections off.
"Does a mechanic need to be an Owner?" — No. The Mechanic role can run and complete inspections when the Inspectors list and the two permissions are set.
"Can somebody else be named as the inspector on the report?" — Yes. Inspector Name lists every user in your shop, so whoever finishes the inspection can name the tech who actually did the walk-around. Pick deliberately — that name is what prints.
Starting an inspection
"How do I add a DOT inspection to a job?" — Open the service → Service Items → + Service Item → Change to Service → type DOT and pick your DOT template → Save.
"Does the truck have to be checked in first?" — No. The Inspection Form button is there as soon as the service item exists, even on a job sitting in Upcoming that has never been checked in.
"I created the service but there is no Inspection Form button." — Usually the template is not on the DOT Service Templates list, or you are a user without DOT access. Work down the checklist in How to Set Up DOT Inspections.
"Can I add an inspection to a job that is already in progress?" — Yes. Add it as another service item the same way.
"Can I run two DOT inspections on one work order?" — Yes, as many as you need. Each gets its own form, its own inspector and its own report — handy for a tractor and a trailer on one visit.
Filling the form in
"How many items are there?" — 57 items across 16 sections. Section 16, OTHER, has no items in it, so all 57 are in sections 1 to 15.
"What does the number next to STATUS mean?" — How many of the 57 checks have an answer. It is not a pass rate.
"What are the three answers?" — OK, N/A and Needs Repair.
"When should I use N/A instead of OK?" — When the truck does not have that part at all. Do not use N/A for something you simply did not check.
"Why does it already say 7 of 57 before I start?" — N/A is remembered for that truck. Every item you marked N/A on that vehicle's last inspection comes back pre-set to N/A, so sections like Motorcoach Seats and Rear Impact Guard can already show a green tick on a tractor. Check them and change any that are not right.
"Is there a faster way than tapping 57 times?" — Mark All OK fills in every item that has no answer yet. It leaves items already marked Needs Repair or N/A exactly as they are, so you can walk the truck first and hit Mark All OK at the end.
"Does Mark All OK wipe out the remembered N/As?" — No.
"Why can't I click Complete Inspection?" — The form is not at 100%. Use Collapse All to spot the section whose counter is short.
"Can the technician do this on their phone?" — Yes. It runs in the phone's browser and can be added to the home screen — see How to Install EasyTruckShop as an App on Any Device.
"Does the technician need a separate app?" — No.
When something fails
"What happens when I mark an item Needs Repair?" — The Mark as Needs Repair window opens with a description already written for you ("Repair Service brakes."), a Repaired toggle, and Attach Files. Save it and the item is outlined red, the section shows n Failed, and a recommendation appears under the item.
"How do I photograph a defect?" — On a phone there is a Camera button next to Attach Files inside the Mark as Needs Repair window — tap it and take the picture. On a computer you only get Attach Files.
"Where is the camera button? I can't find it." — It only appears on a phone. On a desktop browser there is no Camera button, just Attach Files.
"Where does the recommendation go?" — Onto the service order's Recommendations list, with a blue DOT badge so you can see it came from the inspection.
"Can I fix it and still pass the truck?" — Yes. Repair it before the truck leaves and flip the Repaired toggle on the recommendation.
"The truck failed. Can I still hand the driver a report?" — Yes. The report prints with a Failed status and every failed item listed.
Finishing and the report
"How do I finish the inspection?" — At 100%, click Complete Inspection, fill in Inspection Date and Inspector Name, optionally the Report Number, then Generate Report.
"Do I have to enter a report number?" — No, it is optional. If you do enter one you have to type it twice (there is a Confirm the Report Number field), and it then shows as REPORT NUMBER on the finished inspection.
"What number goes in Report Number?" — The number on the DOT sticker you put on the truck.
"Can I edit an inspection after I generate the report?" — No. The 57 answers lock permanently. Check the form before you click.
"Can a completed inspection be reopened?" — There is a Re-open option on the completed service item's ⋮ menu, but it only reopens the service item so the job can carry on. The answers and the report stay locked. If a report went out wrong, message us with the service number.
"Where is the report saved?" — On the service order's Attachments tab, named after the service item, marked Private. Full detail: The DOT Report.
"How do I print or download it?" — Open the completed inspection and use the Report menu → Print or Download. That menu stays there permanently, so you can get another copy any time.
"How do I find a report from six months ago?" — Customers → Vehicles → select the vehicle → History → open the service → Attachments.
"I emailed the invoice but the customer did not get the inspection report." — The report is Private, so it is not attached automatically. Attach it by hand on the email screen, or use the file's ⋮ menu → Change to Public so it goes out every time.
"The customer says they cannot see the photos in the portal." — Those photos are Private. Only Public files show in the Customer Portal.
Anything else
"Is this the same form as my state's periodic inspection?" — The checklist is the federal annual inspection list. Some states run their own periodic programme on a different schedule, so check the form covers what your state asks for before you rely on it.
"I can't see a button, a page or an option this article describes." — It is almost always permissions. What you can see depends on your user's role and permissions, and a user can be limited to certain shop locations. Ask the shop owner or an admin to check Settings → System → Users. If it is still missing, message us from the chat bubble in the app.
