Skip to main content

How To Create a New Service (Work Order): Complete Flow from Complaint to Invoice (Original)

Step-by-step service flow: create, check in, assign technicians, transform complaints, hold, complete, finalize, and unlock — with permissions explained.

Written by Vladimir

Words that mean the same thing in EasyTruckShop: a Service is also called a Work Order or Repair Order (RO) — they are the same thing. A Complaint is also called an Issue — it is the problem the customer reports (for example "Truck won't start"). A Service Item is one job on the work order (for example an inspection or a tire replacement).

This guide follows one real example from start to finish: service #1045 for company Amazon, unit 098, complaint "Truck won't start - clicking sound when turning the key". The final invoice was S1045 for $57.51 ($50.00 labor + $3.50 Shop Supplies fee + tax).

If you do not see a button described in this article, you may not have permission for it. Ask your manager or the shop owner to give you that permission in Settings → Users. Each section below names the exact permission needed.

Where do I create a new service (work order)?

Click Services in the top menu, then click the blue + New Service button in the top right corner. The Services page has boards (tabs) across the top: Estimates, Upcoming, On Site, Priority, Completed, Invoiced, PM Services. Each service shows a colored status like "Checked In" or "In Progress" in the STATUS column.

If you do not see the + New Service button, you are missing the Create and Edit Services permission — ask your manager to enable it for your user.

What do I fill in on the New Service page?

  • Company (required) — select the customer, or create a new company.

  • Contact (required) — fills in automatically when you pick the company. You can add a contact if the customer has none.

  • Vehicle (required) — select the unit, or add a vehicle. Picking the vehicle also pre-fills the price matrix, labor rate, and contact.

  • Check in Notes — optional notes like "vehicle arrives at 3 pm" or "waiting on parts".

Note: if the truck already has open work orders, they appear when you create a new one. You can click them to view past work, but you do not need to close them — just continue creating the new service.

What does each field in Service Settings do?

Click Service Settings to expand it. These settings control pricing and dates for the whole work order:

  • Part Price Matrix — which parts price matrix is used to mark up parts on this service. Default is "Default".

  • Labor Rate — the hourly labor rate for this service. In our example it shows "Standard Shop Labor" at 145 / hour.

  • Scheduled Date — when the truck is scheduled to come in. Shows on the Upcoming board.

  • Due Date — when the work should be done by. Overdue dates show in red on the boards.

  • PO Number — the customer's purchase order number, for example PO-4512. It prints on the invoice.

How do I enter the customer's complaint?

Under ISSUES, type the customer's problem in the COMPLAINT box, in the customer's own words. Example: "Truck won't start - clicking sound when turning the key".

  • AI Recommended Services (the blue bubbles) — each blue bubble is one of your Service Templates (also called Service Types — same thing). The bubbles appear only when the words you type match a template your shop already has. Click a bubble to use that template instead of a plain complaint — see the next section for exactly what happens.

  • MOTOR Labor Estimates — the app looks up standard labor times for your vehicle. If the truck is not in the MOTOR database you will see "Vehicle not found in the motor database" in red. That is only information — it does not block anything.

  • Change to Service — converts the complaint into a real service with a price and duration right away (same as choosing a service template). You can also do this later with Transform.

  • + Add Issue — adds another complaint box if the customer has more than one problem. Each issue becomes its own service item.

What is the difference between a Complaint and a Service Template (Service Type)?

Service Template and Service Type mean the same thing in EasyTruckShop. Here is the difference, in simple words:

  • A Complaint is the customer's story in their own words — use it when the customer describes a problem and you do NOT have a template for it, or you don't know what the repair will be yet. Example: "Customer says the trailer lights flicker when braking and sometimes go dark". A complaint has no price and no duration yet — you diagnose first, then price it later with Transform (or the technician's clocked time).

  • A Service Template (Service Type) is a job your shop already defined with a set price, estimated duration, description, checklist, and parts. Example: "Full Service Oil Change" — $250 fixed, 1 hour 30 minutes. Use it when you already know exactly what work will be done.

When you type a story-style complaint that does not match any template, no blue bubbles appear — that is normal. The complaint saves just fine as free text:

When your words match a template name (for example typing "oil change"), the blue bubbles show every matching template:

What happens when I click a blue bubble? The issue changes from COMPLAINT to Service and everything comes from the template automatically: the service name with its price and time ("Full Service Oil Change — $250 fixed, 1 hour 30 minutes"), the DESCRIPTION ("Drain engine oil, replace oil filter and fuel filters, top off all fluids, grease chassis."), Estimated Duration (1:30), Rate ($250 Fixed), and Quantity (1). You can still edit any of these before saving. The button below now says Change to Complaint.

⚠️ Careful: clicking Change to Complaint switches the issue back to a complaint but clears the text box — the template description is not kept. You will need to type the complaint again.

Bonus: if this truck has open recommendations from earlier visits, they show at the bottom of the New Service page under Recommendations. Click Add to turn a past recommendation into a service item on this new work order — great for selling work that was recommended last time.

What is the difference between "Save as Upcoming" and "Check-in"?

  • Save as Upcoming — creates the work order on the Upcoming board with status "Upcoming". Use this when the truck is not at your shop yet.

  • Check-in — creates the work order AND opens the check-in page right away. Use this when the truck is already at your shop.

Both buttons create the same work order — the only difference is whether the vehicle is checked in now or later.

What does the service page look like after saving?

After "Save as Upcoming" you land on the service page. You see the service number (#1045), the status pill "Upcoming" next to it, a Check In Vehicle button, and your complaint as item "1. Complaint" with status "Not Started". At the bottom you can add more items with + Service Item or add a + Recommendation.

What do the service statuses mean?

  • Upcoming — work order created, truck not checked in yet. Lives on the Upcoming board.

  • Checked In — truck is at the shop. Lives on the On Site board.

  • In Progress — a technician has started working (clocked onto an item).

  • On Hold — work is paused. The service moves back to the Upcoming board with a red "On Hold" pill.

  • Completed — all service items are complete. Lives on the Completed board.

  • Invoiced — the invoice was finalized and the work order is locked. Lives on the Invoiced board.

The Priority board is different: it shows technician columns (one column per mechanic) and you drag service items from "Unassigned Items" onto a technician to plan their day. The Estimates board holds estimates — quotes that are not work orders yet; statuses there are "Estimate" and "Authorized".

How do I check in a vehicle?

Click Check In Vehicle on the service page (or use the Check-in button when creating the service). Every field on the check-in page is optional:

  • Due Date — when the customer needs the truck back.

  • Odometer — current miles. If no reading exists yet it says "No miles have been recorded yet."

  • Lead Technician — who is responsible for the job.

  • Where is the vehicle parked? — for example "Bay 3", so anyone can find the truck.

  • Where is the key located? — for example "Key box hook 7".

  • Check in Notes and Attachments (Upload Files) — extra info and photos.

Click the green Check In button to finish. The status changes to "Checked In" and the service moves to the On Site board. The parking spot and key location show at the top of the service page under PARKING & KEY.

If you cannot check in a vehicle, ask your manager for the Check-In Services permission.

Why does a "Confirm Mileage" popup appear at check-in?

If the odometer you typed looks different from the last recorded reading, EasyTruckShop double-checks with you. Example message: "You entered 88,000 miles, however the last mileage entered was null miles. Are you sure you want to proceed?" Click Confirm if the number is right, or Cancel to fix a typo. This protects your PM (preventive maintenance) mileage tracking.

How do I assign a lead technician to a service?

On a checked-in service, click the Assign button at the top of the page. A window "Assign Lead Technichan" lists your users with their roles (for example Bob - Owner, Fredrick - Lead Mechanic, Luke - Mechanic). Pick one and click Assign. Choose "None" to remove the lead. The lead technician's name then shows at the top of the service page.

If you do not see the Assign button, ask your manager for the Assign users to Services permission.

What does the three-dot (⋮) menu on a service item do?

Every service item has a ⋮ menu in its top right corner with these options:

  • Edit — change the item's description, duration, or rate.

  • Complete — mark this one item complete.

  • Transform — convert a complaint into a real service (see next section).

  • Hold — put this single item on hold, not the whole service.

  • Recommend — move the item to Recommendations (work suggested but not approved yet).

  • Delete — remove the item from the work order.

How do I turn a complaint into a service (Transform)?

Open the item's ⋮ menu and click Transform. The window says "This will convert this complaint into a service." Fill in:

  • Service — pick a service template (for example "Universal inspection").

  • Charged Duration — the time billed to the customer. Click Use Estimate Duration to copy the template's estimated time.

  • Rate — the price, Per Hour or Fixed (our example: $145 Per Hour from the shop labor rate).

  • Description — keeps the original complaint text so the customer sees what they reported.

Click Transform. The toast "Service Item is Transformed" appears and the item becomes "1. Universal inspection" with its duration (1 hour) and the template's checklist (Checklist 0/3).

How do I assign a technician to one service item?

Inside a service item, click Technicians to expand it. Type a name under Assign Technician and click + Assign. This is for who actually wrenches on that item — different from the Lead Technician of the whole service. Ask your manager for the Assign users to Services permission if you cannot do this.

The service also has a Technicians tab at the top which shows every technician on the job with their Hours (time clocked) and Invoiced Hours (time billed). If the hours on an item are wrong, a user with the Edit time on Service Items permission can correct them.

What happens when I put a service On Hold?

Click On Hold at the top of the service page. A warning explains exactly what happens: "All technicians working on this service will be checked out. The service will be moved to the Upcoming page and removed from On-Site and Priority views." Click Confirm. The status changes to a red "On Hold" pill and the toast says "The work order has been placed on hold".

To resume work, open the service and click Check In Vehicle again — it goes back to "Checked In" on the On Site board. Nothing is lost: items, notes, and hours stay on the work order.

Why is the Finalize button greyed out / why can't I finalize the invoice?

You must complete all service items first. If you click Finalize too early, a popup says: "Complete all service items first — To finalize this invoice you need to complete all service items." Click See Service Items to jump to the unfinished items, complete them, then finalize.

Other reasons Finalize can fail: the checklist on an item is not done ("Not all tasks have been completed yet"), or you are missing the Finalize Invoices permission — ask your manager.

How do I add a Recommendation?

Click + Recommendation at the bottom of the Service Items tab. Type the suggestion (example: "Batteries are weak - recommend replacing both before winter"), attach a photo if you want, and click Save. The toast "Your recommendation is added." appears and the note shows in a Recommendations section on the service and prints on the invoice. Recommendations do not add any charge — they are suggestions for future work. Later you can turn an approved recommendation into a real service item.

How do I complete the work and review the invoice?

Check off every task in the item's Checklist (it shows 3/3 when done), then click Complete on the item — or Complete All to complete every item at once (this needs the Complete all Service Items permission). The item turns green with a "Completed" pill and the toast says "This service item is marked complete". When all items are complete the service status becomes "Completed" and a Review Invoice → button appears.

On the Invoice tab you see every line before anything is locked: labor ($50.00), fees (Shop Supplies $3.50), tax checkmarks, and the recommendation text. Pre-Pay lets the customer pay before finalizing (needs the Take Payments permission). You can still add parts or fees here with + Add Part and + Add Fee.

How do I finalize the invoice?

Click Finalize. In the "Finalize Invoice" window:

  • Invoice Date — defaults to today; quick buttons "Today" and "Service Completed Date".

  • Payment Terms — for example "Due on Invoice"; this sets the Due Date automatically.

  • Send E-mail — toggle ON to email the invoice to the customer right away.

  • Note — text that will show on the invoice.

Click Finalize. You need the Finalize Invoices permission for this.

What happens after the invoice is finalized?

The status changes to Invoiced, the toast says "The work order is locked.", and the service moves to the Invoiced board. Our example invoice S1045 shows BALANCE $57.51. Nothing on the work order can be changed anymore. New buttons appear: Credit, Mark Billed, $ Pay (taking a payment needs the Take Payments permission), and Unlock in the top right corner.

How do I unlock a finalized invoice to make changes?

Click Unlock in the top right of the service. In the "Unlock Service" window type a Reason for unlocking (example: "Customer needs an additional repair added after finalizing") and click Unlock. The toast "The work order has been unlocked" appears, the status goes back to Completed, and you can edit items, parts, and fees again. The reason is saved in the activity log so there is a record of who unlocked it and why. When you are done, click Finalize again to lock it.

If you do not see the Unlock button, ask your manager for the Unlock Services permission.

I don't see a button / I can't do something — why?

Almost always this is a user permission. Permissions are set per user by the shop owner or manager in Settings → Users. Tell your manager which action you need and they can turn it on:

  • Can't create or edit a work order → Create and Edit Services

  • Can't check in a vehicle → Check-In Services

  • Can't assign technicians → Assign users to Services

  • Can't use Complete All → Complete all Service Items

  • Can't fix clocked hours → Edit time on Service Items

  • Can't finalize an invoice → Finalize Invoices

  • Can't unlock a finalized invoice → Unlock Services

  • Can't take a payment → Take Payments

After the manager saves the permission, log out and back in if you still don't see the button.

Quick answers (FAQ)

  • Do I have to close old work orders before making a new one? No. Open work orders for the same truck are shown for information only — just continue.

  • Why don't I see the blue AI Recommended Services bubbles? Your complaint text does not match any service template your shop has. That is normal for story-style complaints — save it as a complaint and Transform it into a service later. Bubbles only appear when your words match a template name.

  • Can I skip the odometer at check-in? Yes, every check-in field is optional. But entering miles keeps PM schedules accurate.

  • Where did my service go after On Hold? To the Upcoming board with a red On Hold pill. It is removed from On Site and Priority views.

  • What is the difference between a Recommendation and a Service Item? A service item is approved work that gets billed. A recommendation is a suggestion with no charge — it prints on the invoice so the customer sees it.

  • Can the customer pay before the invoice is finalized? Yes — use Pre-Pay on the invoice tab.

  • How do I fix an invoice I already finalized? Click Unlock, type the reason, make the change, then Finalize again.

Still stuck? Message us in the chat bubble at the bottom right corner and our team will help you.

Did this answer your question?