Skip to main content

Setting up mechanic time tracking: what has to be turned on first

The order to switch things on so mechanic hours, efficiency and labor cost all report correctly — permissions, assignable users, hourly pay rates — and what each one unlocks.

Written by Vladimir

Getting mechanic time tracking working

Mechanic hours, efficiency and labor cost in Easy Truck Shop depend on several separate settings, and if one is missing the reports look broken rather than empty. This article gives the order to turn them on and says what each one unlocks, so a new shop — or a new technician — reports correctly from day one.

Work through it top to bottom. Each step is what the step below it depends on.

The setup checklist

Step

What to set

What breaks without it

1

Can be Assigned to Services on each technician

The tech cannot be put on a job, so no job hours are ever recorded

2

Hourly pay rate on each technician

Labor Cost and Cost of Clocked Hours read $0.00 for everyone

3

View and Edit Timesheets on managers

No TimeSheets page at all in the profile menu

4

View Efficiency on managers

TimeSheets opens with only the weekly grid — no Timeline, Efficiency or Productivity

5

Edit time on Service Items on managers

Nobody can correct a mechanic's job hours after the fact

6

Technicians in the habit of clocking in and using breaks

Timesheets is blank and Productivity reads 0% however much work is done

Step 1: make each technician assignable

Go to Settings → System → Users, open the technician, scroll to Permissions and turn on Can be Assigned to Services, then click Save.

Until this is on, the technician's name will not come up in the Assign Technician search on a service item, which means he can never clock into a job and will never appear with worked hours. See Permission: Assign users to Services.

Step 2: set an hourly pay rate

In the same place — Settings → System → Users, open the technician — set their hourly rate and scroll down to Save.

This is the number Easy Truck Shop multiplies clocked hours by to show what labor costs you. Without it, Labor Cost and Cost of Clocked Hours on the Efficiency tab sit at $0.00 and every job looks 100% profitable on labor.

It is a management figure, not payroll: it does not include taxes, benefits, overtime or bonuses. See Understanding Mechanic Hourly Pay Rates & Profit Visibility.

Step 3 and 4: give managers the two reporting permissions

Mechanic reports need two permissions, and shops routinely turn on only the first:

  • View and Edit Timesheets — puts TimeSheets in the profile menu and shows the weekly clocked hours of every user in the shop. Only give it to people who should see the whole team's hours.

  • View Efficiency — adds the Timeline, Efficiency and Productivity tabs.

If a manager says "I can see hours but there is no efficiency report", step 4 is the one that is missing.

Step 5: allow time corrections

Turn on Edit time on Service Items for whoever fixes timesheets. Without it, the Add Time Log and Clock In buttons do not appear in the Edit Assignment window and nobody can correct job hours.

How to actually make the corrections is in A mechanic forgot to clock in — how do I fix their hours?

Step 6: get the habits right

The settings only produce good numbers if the shop floor uses both clocks. Two habits matter:

  1. Clock in for the shift at the start of the day and out at the end, using the timer in the top bar. Without this the Timesheets tab is blank and Productivity shows 0% no matter how much work gets logged.

  2. Use Start Break for lunch rather than just walking away. Break time is taken out of clocked hours, so proper breaks stop lunches inflating idle time.

How to check the setup worked

  1. Have one technician clock in, start a job, work a few minutes, pause, and clock out.

  2. Open TimeSheets → Timeline for today. You should see a light blue bar for the shift and a dark blue bar for the job on his row. Two bars means both clocks are working.

  3. Mark the service item Complete, then open TimeSheets → Efficiency. His worked and invoiced hours should appear, and Labor Cost should be a real number rather than $0.00.

  4. Open TimeSheets → Productivity. He should have clocked hours, worked hours and the difference as idle.

If any of those are missing, the table at the top of this article says which step to go back to.

What this setup does NOT give you

  • It is not a payroll system. Hourly rates are for seeing labor cost against jobs. Taxes, benefits, overtime and bonuses are not part of it.

  • There is no per-shop or per-role default. Assignability and pay rate are set on each user individually.

  • There is no category for non-billable time. Even fully set up, shop cleaning and waiting time land in Idle Hours with no breakdown — see Can I track shop cleaning and other time that isn't on a job?

  • Turning a permission on does not backfill history. Setting an hourly rate today does not put labor cost on jobs that were completed before it.

  • A technician still cannot edit his own hours whatever you turn on for him. Corrections are a manager action.

Other ways shops ask this question

  • "How do I set up time tracking for a new mechanic?" → Turn on Can be Assigned to Services and set his hourly rate under Settings → System → Users.

  • "Why is Labor Cost $0.00 for everyone?" → No hourly pay rates are set. That is step 2.

  • "I can see timesheets but there is no efficiency tab." → View Efficiency is not turned on for that user.

  • "My new tech isn't in the assign list." → He needs Can be Assigned to Services.

  • "Why is my whole shop showing 0% productivity?" → Nobody is clocking in for their shift. Productivity divides by clocked hours.

  • "What do I need to turn on before the mechanic reports work?" → The six steps in the table above, in order.

  • "Can I stop a manager seeing everyone's hours?" → Not while they have View and Edit Timesheets — it shows the whole team.

  • "Does setting a pay rate change past jobs?" → No. It applies from when you set it.

  • "Can I use this to run payroll?" → You can export the weekly hours from the Timesheets tab, but Easy Truck Shop is not a payroll system and the pay rate excludes taxes, benefits and overtime.

Related

Did this answer your question?