Skip to main content

A mechanic forgot to clock in — how do I fix their hours?

Two clocks, two fixes. Add or correct shift hours from the Timesheets grid or the Timeline, and job hours from the service item or the Timeline bar.

Written by Vladimir

Fixing a mechanic's hours

A tech forgot to clock in, clocked into the wrong job, or left the clock running over lunch. All of it is fixable after the fact. This article shows every place in Easy Truck Shop where a manager can add, change or delete a mechanic's time.

First: which clock is wrong?

Easy Truck Shop keeps two separate clocks for every technician, and they are fixed in different places. Work out which one is wrong before you start.

What is wrong

Which clock

Where you fix it

His paid hours for the day are wrong or missing

Shift clock

Timesheets tab, or the light blue bar on Timeline

The hours on a work order are wrong or missing

Job clock

The service item, or the dark blue bar on Timeline

He worked but his timesheet is empty

Shift clock

He never clocked in — add the shift entry

His timesheet is right but the job shows no labor

Job clock

He never started the item — add a time log

What permissions you need

A technician cannot fix his own past entries. His own Overview pop-up is read-only.

How do I add a shift a mechanic forgot to clock in for?

  1. Click your name in the top right corner, then TimeSheets, and stay on the Timesheets tab.

  2. Use the ‹ and › arrows to reach the right week.

  3. Click the day cell where that mechanic's hours should be. Empty cells work too — they open saying "No timesheets registered". The window is slow, so click once and wait a few seconds; clicking twice closes it again.

  4. In the Logged Hours window, click Add Timesheet.

  5. Set Clocked In and Clocked Out. The duration at the top updates as you type.

  6. Click Save. The hours appear in the grid straight away.

If the app refuses with "The clocked out can not be in the future", your clock-out time is later than the current time. Shifts can only be entered after they happen.

Marking an entry as a break

The New Timesheet window has an Is for Break toggle. Turn it on and the entry is stored as a break instead of work — it will not count toward the mechanic's worked hours, and it feeds Break Hours on the Productivity tab.

Clocking a mechanic in from your screen

The same Logged Hours window has a Clock In button. That starts a live clock for that mechanic from right now — useful when someone is already under a truck and forgot to clock in on the way past.

How do I correct a shift that is already there?

The quickest route is the Timeline tab. Pick the day, find the mechanic's row, and click the light blue bar — that is his clocked-in stretch.

The Edit Timesheet window opens showing the user, the date and the duration, with:

  • Clocked In and Clocked Out times you can change, then Update.

  • The Is for Break toggle, so you can turn a stretch of work into a break after the fact.

  • A red Remove button that deletes the entry outright.

How do I add or fix hours on a job?

There are two routes and they open the same kind of window.

From the service

  1. Open the service and find the service item.

  2. Open Technicians on that item. If the mechanic is not listed, type his name into Assign Technician and click Assign first — you cannot log time for someone who is not on the item.

  3. Click the ⋮ menu at the top right of the item to open Edit Assignment. It lists every time log for that mechanic on that item with Started, Stopped and Hours.

  4. Click Add Time Log, set the Start Date and time and the End Date and time — the Hours figure at the top updates as you type — then click Save. You will see "New log created".

The same window has a Clock In button to start that mechanic on the item live, and an Unassign button. Unassigning does not delete hours he has already logged.

From the Timeline

On the Timeline tab, click the dark blue bar — the one labelled with the service number, such as "#1060 · 1. Complaint". The Edit Assignment Log window opens where you can change the start and end and click Update, or click Remove to delete that log.

This is the fastest way to fix "he clocked into the wrong job" — remove the log from the wrong item, then add one on the right item.

What changes after you fix it

Corrections feed the mechanic reports immediately, but not all of them move the same numbers.

What you changed

What moves

Added or edited a shift entry

Timesheets grid, the light blue Timeline bar, Clocked Hours on both Efficiency and Productivity, and Idle Hours

Marked an entry Is for Break

Break Hours on Productivity; the time comes out of Clocked Hours

Added or edited a job time log

The dark blue Timeline bar, the item's timer, Worked Hours on Productivity — and Worked Hours on Efficiency too, but only once the item is marked Complete

If you fix a mechanic's job hours and his Efficiency does not change, check that the service item is actually marked Complete. Efficiency only counts completed work.

Who changed what — the History button

The Logged Hours window has a History button. It shows the audit trail for that mechanic on that date, for example "Clocked in Bob to WORK, 08/25/2026 10:17 am". Use it when a tech disputes his hours or you need to see who edited an entry.

What you can NOT do

  • You cannot enter a clock-out time in the future. The app blocks it, so shifts have to be entered after they happen — you cannot roster someone in advance.

  • A mechanic cannot fix his own hours. His Overview pop-up shows his entries but does not let him edit them.

  • You cannot log job time for someone who is not assigned to the item. Assign them first.

  • There is no bulk edit. Entries are corrected one at a time, per mechanic, per day.

  • Fixing hours does not re-price a finalized invoice. If the job was billed by the hour and the invoice is already finalized, check the invoice separately — changing the time log does not rewrite it for you.

  • Deleting a time log is permanent. Remove has no undo; you would have to add the log again by hand.

Other ways shops ask this question

  • "A mechanic forgot to clock in — how do I add the hours?" → TimeSheets → Timesheets tab → click his day → Add Timesheet.

  • "How do I edit a timesheet?" → Click the day cell on the Timesheets tab, or the light blue bar on the Timeline.

  • "How do I change the time on a work order?" → The service item's ⋮ → Edit Assignment, or click the dark blue bar on the Timeline.

  • "My tech clocked into the wrong job." → Click the dark blue bar on the Timeline, Remove it, then add a time log on the correct item.

  • "He forgot to clock out and it ran all night." → Open the entry and change the Clocked Out time, or Remove it and add a correct one.

  • "How do I record a lunch break he forgot?" → Add a timesheet entry with Is for Break turned on.

  • "Is there a way to see who changed a timesheet?" → Yes. Open the day and click History.

  • "Can my mechanics fix their own hours?" → No. They can view their own hours under the clock menu → Overview, but only a user with View and Edit Timesheets can change them.

  • "Why can't I save the timesheet?" → The clock-out time is in the future. Use a time that has already passed.

  • "I fixed his hours but the efficiency did not change." → The service item is not marked Complete. Efficiency only counts completed jobs.

Related

Did this answer your question?