The short answer
No. Easy Truck Shop has no category for shop cleaning, sweeping the bay, waiting on parts, shop meetings, or any other work that is not attached to a service item. There is nowhere to clock into "shop time".
That time is not lost — it is still counted, as Idle Hours on the Productivity tab. What you do not get is a breakdown of what it was spent on. This article explains exactly where the time goes and what shops do about it.
What actually happens to that time
Easy Truck Shop runs two clocks for each technician, and this is the consequence of how they interact:
The shift clock in the top bar records that the mechanic is at the shop.
The job clock on a service item records that he is working on a specific truck.
When a mechanic clicks Pause on a job — or finishes one and has not started the next — the job clock stops, but the shift clock keeps running. He is still on the clock and still being paid. Easy Truck Shop records that stretch as time clocked in with no job attached.
That is the definition of Idle Hours, in the app's own words: "The difference between clocked hours and worked hours. This is the time that a user is clocked in but not actively working on a service."
The three buckets a mechanic's day falls into
Every minute a mechanic is at the shop lands in one of three places, and only one of them can be labelled.
Bucket | How it is recorded | Where you see it |
Worked | Clocked into a service item | Worked Hours on Efficiency and Productivity, dark blue bar on Timeline |
Break | Start Break on the clock menu, or Is for Break on a manual entry | Break Hours on Productivity. Excluded from Clocked Hours entirely |
Idle | Everything else — clocked in, no job running | Idle Hours on Productivity |
Break is the only labelled non-work category in the product. Shop cleaning, waiting on a part, tidying up and standing around all land in Idle Hours together, with nothing to tell them apart.
Where to see your shop's non-billable time
Click your name in the top right corner, then TimeSheets, then the Productivity tab.
Set the date range you want. It opens on Last 30 Days.
Read the Idle Hours card for the shop total, and the Idle Hours column for each mechanic.
Click a mechanic's row to drill in. You get his Hours Clocked, Hours on Break, Hours Worked and Idle Hours, plus the list of the jobs his worked hours went to. Whatever is left over is the idle time — the list tells you what it was not.
A worked example
A technician is clocked in for 8 hours and logs 4 hours against one service item. The Productivity tab shows Clocked 8, Worked 4, Idle 4, Productivity 50%. Those 4 idle hours might have been shop cleaning, waiting on a parts delivery, or a slow morning. Easy Truck Shop cannot tell you which, only that they were not on a truck.
What shops do about it
There are two practical approaches. The first is safe; the second has a real cost you need to understand before you use it.
Option 1: use Idle Hours as your indirect-labour number
Read Idle Hours on the Productivity tab as the shop's non-billable time and track it week to week or month to month. A rising idle number tells you something changed even if the report cannot say what. This costs nothing and does not distort any other report.
To make the number honest, get the shop into the habit of using Start Break for genuine breaks. Break time is taken out of Clocked Hours, so lunches stop inflating the idle figure.
Option 2: book shop time to an internal work order
Some shops create a customer such as "Shop — Internal", raise a service on it for shop cleaning or yard work, and have technicians clock into it like any other job.
This does give you a labelled figure, but be clear about what it does to your reporting:
Those hours become Worked Hours on both Efficiency and Productivity, so they stop counting as idle.
Once the item is marked Complete they also become Invoiced Hours and Charged for Labor on the Efficiency tab, which distorts your efficiency percentage.
The service produces an invoice, which will appear in your Sales and A/R figures unless you handle it.
Only use this route if you are prepared for those side effects. If clean Efficiency numbers matter more to you than a labelled cleaning figure, stay with Option 1.
What Easy Truck Shop does NOT do here
There is no shop-time, indirect-labour or overhead category. The only non-work category is Break.
Pausing a job does not stop the shift clock. Clock out of a service item and the timer in the top bar keeps running. That is by design, not a fault.
There is no reason or comment on idle time. Nobody can tag a stretch as "cleaning" or "waiting on parts".
There is no idle-time report. Idle Hours appears only as a card and a column on the Productivity tab, and in the per-mechanic drill-down.
The Timeline does not show idle time as a bar. Idle time is the gap — light blue with no dark blue on top of it. You read it by eye.
Idle Hours does not appear on the Efficiency tab at all. Efficiency compares billed hours to worked hours and ignores clocked time completely.
Break time is not idle time. Breaks are taken out of Clocked Hours, so they never reach the idle figure.
Other ways shops ask this question
"Can I track shop cleaning time?" → No. There is no category for it. It lands in Idle Hours on the Productivity tab.
"Is there a way to clock into shop time instead of a job?" → No. The only options are a service item or a break.
"How do I track non-billable hours?" → Read Idle Hours on the Productivity tab. It is clocked hours minus worked hours.
"My mechanic clocked out of the service order but the time is still running." → That is correct. The shift clock is separate and keeps going until he clocks out in the top bar.
"Why are my idle hours so high?" → Either techs are not clocking into jobs, or they are not clocking out at the end of the day, or there really is that much time off the trucks. Check the Timeline for a day to see which.
"Can I see what a mechanic did during his idle time?" → No. You can only see the jobs he did log time on, in the Productivity drill-down. The rest has no detail.
"Can I add a category for meetings or training?" → Not at the moment. The nearest options are a break or an internal work order.
"Does lunch count as idle time?" → Only if the mechanic did not use Start Break. Proper breaks are excluded from clocked hours entirely.
"How do I bill a customer for shop supplies time?" → That is a fee, not labor. See Where do I see how much I charged in shop supplies and other fees?
What to check if the numbers look wrong
Idle Hours is enormous for one mechanic. He probably left the shift clock running overnight. Open the Timeline for that day and click the light blue bar to correct the clock-out time.
Idle Hours equals his whole shift. He clocked in but never started a job. The work may still have been done — check whether anyone logged time on the service items.
Idle Hours is negative or zero when it should not be. He logged job time without clocking in, so worked hours exceed clocked hours. Add the missing shift entry.
Break Hours is always 0. Nobody is using Start Break. Until they do, lunches count as idle time.
Related
Where do I check mechanic reports? — the four TimeSheets tabs and what each measures.
How do I clock in, take a break, and clock out? — using Start Break properly so idle time stays meaningful.
How do I clock in and out of a job? — why pausing a job leaves the shift clock running.
