How do intervals work?
Click + Add Interval. You set the frequency as "Every X" plus a unit: Days, Weeks, Months, Quarters, Years — plus Miles and Hours when the vehicle is set up to track them. In the picture: 1 = frequency (every 5,000 Miles), 2 = Last interval at (when the job was last done — for miles, the app fills this in from the vehicle's odometer if it knows it), 3 = Next interval at (calculated automatically: 120,000 + 5,000 = 125,000), 4 = Show pm ... before (how early the PM shows up on the Due list, for example 500 miles before).
⚠️ No "Miles" in the unit list? The vehicle is not tracking mileage.
The unit list is built from what that vehicle tracks. If Track Odometer is off on the truck, Miles never appears — no matter where you create the PM from. We tested it: on a vehicle with tracking off, the list contains only Days, Weeks, Months, Quarters and Years. The same applies to Hours and Track Hours.
The fix: open the vehicle, click Edit, switch Track Odometer on (or Track Hours), click Save, then create the PM again. Miles will be in the list.
This is set per vehicle, which is why it can go wrong on one truck while every other truck is fine.
⚠️ Warning: changing the unit does NOT recalculate the "Next interval at" date. We tested this: we typed "every 6 Days" (next date became 08/22/2026), then switched the unit to Months — the next date stayed 08/22/2026 instead of moving 6 months out. Always check "Next interval at" after you change the unit, and fix it by hand if needed.
Here is that mistake on screen: 1 = the unit was changed to Months, but 2 = the Next date still shows 08/22/2026 (6 days away, not 6 months).
Can one PM have more than one interval?
Yes. Click + Add Interval again. For example: every 5,000 miles AND every 3 Months. The PM becomes due at whichever comes first. Each interval shows its own "next due" in the list.
Quick answers about interval units
"There is no Miles on the list." → Track Odometer is off on that vehicle. Open the vehicle → Edit → turn on Track Odometer → Save, then create the PM again.
"There is no Hours on the list." → Same thing, with Track Hours.
"It works on my other trucks but not this one." → Odometer tracking is set per vehicle, not per shop. Check that specific truck.
"I turned it on but Miles still isn't there." → Close the PM window and open it again. The unit list is built when the window opens.
"Does it matter where I create the PM from?" → No. The vehicle's tracking setting decides the unit list, whether you start from the vehicle's PM Services tab, the PM board, or a service item.
Related Articles
Previous step: PM Services: How to Create a PM from the PM Services Board
Related:
How to Add a Vehicle to a Customer — where the Track Odometer and Track Hours toggles live



