PM Service, PM, and Preventive Maintenance all mean the same thing in EasyTruckShop. A PM is a maintenance reminder attached to one vehicle (truck, trailer or other equipment) for one service type (Service Template). EasyTruckShop tracks the date, mileage, or hours, tells you when the work is due, and can start the work order for you with the right parts already added.
Where can I create a PM from?
There are 4 places to create a PM:
1. Services → PM Services → the + New PM button (the main PM board).
2. On a service item → click the 3 dots (⋮) on the item → Create PM. This is the fastest way, because it saves the parts you already added to that item.
3. Service Template page → Settings → Service Settings → Templates → open a template → PM Services tab → New PM. This tab also lists every vehicle that has a PM for this template.
4. Vehicle page → Customers → Vehicles → open a vehicle → PM Services tab → + New PM. This tab lists all PMs for this one vehicle.
The picture below shows the main PM board: 1 = the PM Services tab, 2 = the + New PM button, 3 = the filters (All, Due, By Date, By Mileage, By Hours).
How do I create a PM from the PM Services board?
Go to Services → PM Services and click + New PM. The Create PM Service window has 4 parts: 1 = pick the Vehicle, 2 = pick the Service (a Service Template, for example Oil Change), 3 = + Add Interval (when it is due), 4 = Parts (what parts this vehicle needs for this job). Then click Create.
How do intervals work?
Click + Add Interval. You set the frequency as "Every X" plus a unit: Days, Weeks, Months, Quarters, Years, or Miles. In the picture: 1 = frequency (every 5,000 Miles), 2 = Last interval at (when the job was last done — for miles, the app fills this in from the vehicle's odometer if it knows it), 3 = Next interval at (calculated automatically: 120,000 + 5,000 = 125,000), 4 = Show pm ... before (how early the PM shows up on the Due list, for example 500 miles before).
⚠️ Warning: changing the unit does NOT recalculate the "Next interval at" date. We tested this: we typed "every 6 Days" (next date became 08/22/2026), then switched the unit to Months — the next date stayed 08/22/2026 instead of moving 6 months out. Always check "Next interval at" after you change the unit, and fix it by hand if needed.
Here is that mistake on screen: 1 = the unit was changed to Months, but 2 = the Next date still shows 08/22/2026 (6 days away, not 6 months).
Can one PM have more than one interval?
Yes. Click + Add Interval again. For example: every 5,000 miles AND every 3 Months. The PM becomes due at whichever comes first. Each interval shows its own "next due" in the list.
Can a vehicle have two PMs for the same service type?
No. One vehicle can have only one PM per service type. If you try to create a second one, you get this red error: "This vehicle already has a PM service with this service type." Pick a different service type, or edit the existing PM instead.
How do I add parts to a PM?
In the Parts section of the PM, search by part number and set the quantity for this exact vehicle. Example: Oil filter - JD × 1 and 15W40 Oil × 11 gallons. When the PM is started later, these parts are added to the work order automatically — so each vehicle gets its own oil amount and filter without anyone typing it again.
How do I create a PM from a service item (the 3 dots)?
This is the quickest way to save a vehicle's parts for next time. When you do a job for a vehicle the first time (for example an oil change), add all the filters and oil to the service item. Then click the 3 dots (⋮) on that service item (1) and click Create PM (2).
The Create PM window opens already filled in: 1 = the service type and the vehicle are taken from the item, and 2 = the parts and quantities you added to the item are copied into the PM. You only add the interval and click Create. Next time this vehicle comes in for this job, starting the PM adds the same parts and quantities automatically.
Don't see "Create PM" in the 3-dots menu? That vehicle already has a PM for this service type (remember: one PM per vehicle per service type). The menu hides Create PM instead of letting you make a duplicate.
Can I create a PM from the Service Template page?
Yes. Go to your profile menu → Settings → Service Settings → Templates, open a template (for example Wheel balancing) and click the PM Services tab (1). Click New PM (2) to create one. The list (3) shows every vehicle that has a PM for this template, with its interval and next due.
Can I create a PM from the vehicle's page?
Yes. Go to Customers → Vehicles, open the vehicle, and click the PM Services tab (1). Click + New PM (2). The list (3) shows all PMs for this one vehicle — for example DOT Inspection every 365 days, Wheel balancing every 10,000 miles, Oil Change every 20,000 miles.
Can I use the same service template on many different vehicles?
Yes — this is the normal way to use PMs. One service template (for example Oil Change) can have a PM on many different vehicles, and each vehicle's PM keeps its own parts and quantities. Truck 101 can have Oil Change with 11 gallons of 15W40 and its own filter, while another vehicle has the same Oil Change template with different parts and amounts. The template is shared; the parts are per vehicle.
So you have two places to save parts, and you decide which fits your shop:
1. Parts on the PM (per vehicle) — best when vehicles are different from each other. Each vehicle gets its own filter, oil amount, and quantities.
2. Parts on the service template (Automatic Part List) — these parts pull in every time the template is used, on any vehicle, always the same. This is useful if you run a fleet of identical trucks, or a specific job that always needs the same parts — add the template and all the parts land automatically. But if your vehicles are different, remember the template parts stay the same even when the vehicle changes.
Have a big fleet? We can assign PMs in bulk for you
If you have a fleet of many identical vehicles — for example 200 Volvos, or you buy trucks in bulk every year — creating PMs one vehicle at a time takes a long time. You don't have to do it by hand.
Reach out to our support team and we can assign the PMs to your units for you, so you don't need to go into each vehicle. This works for trucks, trailers, or any other equipment that shares the same maintenance schedule. For example, all the PMs a truck needs at a certain mileage or date: Air dryer filter replacement, Oil change, Differential oil change, Tune up — we set them up across the whole fleet at once.
⚠️ Warning: template parts and PM parts ADD UP — don't list the same part in both
A Service Template can have its own Automatic Part List ("parts that you always want to be included in the service"). A PM also has its own Parts list. If the same part is in both, starting the PM adds BOTH quantities to the work order.
We tested it: the Wheel balancing template had BRK-8800PAD × 1 in its Automatic Part List, and the vehicle's Wheel balancing PM had BRK-8800PAD × 3. Starting the PM created a service with 4 brake pad sets (1) — the activity log shows the part was added twice (2 and 3). The customer would be charged for 4 when the job needs 3.
This is the template's Automatic Part List where the extra part came from (1).
⚠️ Rule of thumb: keep a part in ONE place only. Use the template's Automatic Part List for parts that are the same for every vehicle. Use PM parts for quantities that are different per vehicle (like oil amount). If a part is in both, the quantities are added together on the work order.
How do I start a PM?
On the PM Services board, click the PM's row. A window opens showing 1 = when it is due, 2 = the interval(s), 3 = Edit PM (change intervals or parts), and 4 = Start PM.
Clicking Start PM creates a new service (work order) automatically. It is already Checked In, it has the note "Check in Note: Started from PM Service" (1), and the PM's parts are added to the service item with their live stock status (2) — in our test, 11 gallons of 15W40 Oil showed "Received" and the Oil filter - JD showed "Out of Stock", so you know right away what needs ordering.
You can also start PM after the service order was created for something else, and if the PM is due, you can add it straight from service, there will be a reminder alert.
Can I start the same PM twice? No. If the PM's work order is still open, the window shows the message "In Progress: This PM has been started on." and there is no Start PM button. This protects you from creating duplicate work orders.
What does "overdue" mean on a PM?
For mileage PMs, EasyTruckShop compares the "next due" mileage with the vehicle's current odometer. In our test the PM was due at 60,000 miles but the vehicle already had 104,000 miles, so the board showed "44,000 miles overdue" in red (1). Time PMs work the same way with dates. Overdue PMs stay on the Due list until you do the work.
What happens when I complete the PM's work order?
When you complete the service item, the app asks for the vehicle's odometer reading (it shows the last known reading, for example "Latest was 104,000 miles"). After completing, the service shows the completed date and the miles you entered (1).
The PM resets itself automatically. In our test, the PM was overdue at 60,000 miles. We completed the work order at 104,500 miles — the PM immediately updated to due at 114,500 miles ("in 10,000 miles") (1). You never have to update the PM by hand after doing the work. The vehicle's odometer on the vehicle page is updated too.
What do the statuses and filters on the PM board mean?
In Progress (green, yellow row) = a work order for this vehicle and service type is already open. Red text like "30,000 miles overdue" = the PM is past due. archived next to a service name = that service template was archived. The filters at the top are All (every PM), Due (due or overdue only), By Date, By Mileage, and By Hours (for equipment tracked by engine hours, like trailers/reefers). New intervals can be set in Days, Weeks, Months, Quarters, Years, or Miles.
What permissions do I need for PM Services?
PM permissions are per user: Settings → Users → open the user → Permissions → Services → PM section. There are 3 toggles, and we tested each one:
1. View PM Services — OFF: the PM Services tab does not exist for the user at all. ON: the user gets the PM Services tab with a read-only list. Full details: Permission: View PM Services.
2. Edit and Create PM Services — adds the Edit PM button when the user opens a PM. Full details: Permission: Edit and Create PM Services.
3. Start PM Services — adds the Start PM button when the user opens a PM. Full details: Permission: Start PM Services.
This is what a user with only "View PM Services" sees — the PM list with no + New PM button, no search, and no filters (1):
And when a view-only user clicks a PM, the window has only a Close button (1) — no Edit PM, no Start PM:
Note: in our test, the board's + New PM button, search, and filters did not appear for a Mechanic even with all 3 PM toggles on — the full board tools showed for the Owner. A user with "Edit and Create PM Services" can still edit PMs through the Edit PM button, and create them from a service item's ⋮ menu if they can work with service items.
Quick answers
"I don't see the PM Services tab." → Turn ON View PM Services for that user (Settings → Users → user → Services → PM).
"I can see PMs but there is no Start PM button." → Turn ON Start PM Services for that user.
"I can't edit a PM." → Turn ON Edit and Create PM Services for that user.
"There's no Create PM in the 3-dots menu on my service item." → That vehicle already has a PM for this service type. Edit the existing PM instead. Or you are not using the service template, complaints will not have the Create PM.
"It says: This vehicle already has a PM service with this service type." → One vehicle can have only one PM per service type. Edit the existing one or pick another service type.
"Can I use one service template for many vehicles with different parts?" → Yes. Create a PM for each vehicle with that template — each PM keeps its own parts and quantities. Only parts saved on the template itself (Automatic Part List) are always the same for every vehicle.
"The next due date looks wrong after I set the interval." → Changing the unit (Days → Months etc.) does not recalculate the next date. Fix "Next interval at" by hand.
"Starting the PM added too many parts." → The same part is probably in BOTH the template's Automatic Part List and the PM's parts. The quantities add up. Remove it from one of the two places.
"I can't start the PM again." → Its work order is still open ("In Progress: This PM has been started on."). Finish or archive that service first.
"Do I need to update the PM after the job is done?" → No. Completing the work order (with the odometer reading) resets the PM to the next interval automatically.
"I have a large fleet — do I have to create PMs one vehicle at a time?" → No. Contact our support team and we can assign the PMs to all your units in bulk, so you don't have to go into each vehicle.





















