Skip to main content

Why isn't my truck's mileage updating from Samsara?

Check the company is synced, turn on the Samsara column, make sure the VIN matches in both Samsara and Easy Truck Shop, then give the mileage time to update.

Written by Vladimir

In short: Open the company's Vehicles tab and look at the Samsara column. If it's empty, the VIN doesn't match. Make sure the VIN is correct and the same in both Samsara and Easy Truck Shop. Once the Samsara unit shows in the column, the truck is connected, and the mileage updates 10 to 15 minutes later.

I see the truck in the Samsara column, but the mileage didn't update

That's normal, and nothing is wrong. If you see the Samsara unit number in the Samsara column, the truck is connected. The mileage takes time to update after you connect. Give it 10 to 15 minutes, then refresh the page.

Still showing the old mileage after 15 minutes? Message us in the chat and ask for a person.

How do I fix mileage that isn't updating from Samsara?

Go through these checks in order:

  1. Is the company synced? Go to Settings, then Integrations, then Samsara. The company must be listed under Companies, and you must click Save. Only companies listed there get their trucks synced.

  2. Is the truck matched? Go to Customers, open the company and stay on the Vehicles tab. Look at the Samsara column for that truck. Don't see the column? See the section below to turn it on.

  3. Is the Samsara column empty? Then the truck isn't matched. Double check the VIN. It must be correct, all 17 characters, and the same in both Samsara and Easy Truck Shop. To fix it in Easy Truck Shop, open the vehicle, click Edit, fix the VIN and click Save. If the VIN is wrong in Samsara, fix it there. Then check the Samsara column again.

  4. Do you see the Samsara unit in the column? Then the truck is connected. The mileage takes time to update after you connect, usually 10 to 15 minutes.

  5. Still showing the old mileage after that? Message us in the chat and ask for a person.

I don't see a Samsara column on the Vehicles tab

The Samsara column can be turned off. To turn it on:

  1. Click Customers at the top, then click the company.

  2. Stay on the Vehicles tab.

  3. Click the columns icon at the right end of the table header.

  4. Tick Samsara in the Columns list.

  5. The Samsara column now shows in the table, with the Samsara unit for each matched truck.

Where do I turn on the Samsara column? The numbers in the picture match the steps: 1 = Customers. 2 = the Vehicles tab. 3 = the columns icon. 4 = the Samsara box to tick. 5 = the Samsara column with the Samsara unit for each truck.

How to turn on the Samsara column: 1 Customers at the top, 2 the Vehicles tab on the company page, 3 the columns icon at the right of the table header, 4 the Samsara box ticked in the Columns list, 5 the Samsara column showing the Samsara unit for each truck.

If Samsara isn't in the Columns list at all, Samsara isn't connected in your shop yet. See How to Connect Samsara.

What does an empty Samsara column mean?

An empty Samsara column means that truck isn't matched to a truck in Samsara. The usual reason is a VIN that is wrong or different between Samsara and Easy Truck Shop. Fix the VIN so it is the same in both, and the Samsara unit shows up in the column.

How long does the mileage take to update?

Once you see the Samsara unit in the Samsara column, the truck is connected. The mileage doesn't change right away. Give it 10 to 15 minutes to update.

Related questions

  • My vehicle did not update mileage from Samsara.

  • I see the vehicle in the Samsara column but no mileage update.

  • Samsara is connected but the odometer still shows the old mileage.

  • I don't have a Samsara column on my vehicle list.

  • The Samsara column is empty for my truck.

  • I get a VIN error with Samsara.

  • How long does Samsara take to update mileage?

Related articles

Did this answer your question?