Skip to main content

Shop Supply Fee: How to Automatically Add Shop Supplies to Every Service

Set one Shop Supply Fee that lands on every new service: flat, or a percentage of labor, parts, subtotal or total, with an upper limit and a list of customers to leave out.

Written by Vladimir

The Shop Supply Fee is one fee that EasyTruckShop adds to every new service on its own. You set the Shop Supply Fee up once, and after that it lands on every work order without anyone typing it.

What is the Shop Supply Fee?

The Shop Supply Fee is a single automatic fee, set once per shop, that EasyTruckShop puts on the invoice of every new service. Shops use the Shop Supply Fee to recover rags, brake clean, grease, gloves, zip ties and drill bits — the small consumables you cannot bill to a part number.

The Shop Supply Fee can be a flat dollar amount, or a percentage worked out from the labor, the parts, the subtotal or the total on that job.

Two names, one thing. The settings page is called Shop Supply Fee (singular). The name that prints on the invoice defaults to Shop Supplies (plural). They are the same fee.

Where do I find the Shop Supply Fee settings?

You find the Shop Supply Fee settings at your name in the top right → Settings → Service Settings → Shop Supply Fee.

Inside Settings, open the Service Settings tab. Service Settings has three pages down the left side: Templates, Labor Rates and Shop Supply Fee. Click Shop Supply Fee.

Who can do this: you need the Manage Service Settings permission. If Settings does not appear in the menu under your name, that permission is off — ask your shop owner to turn it on.

How do I turn the Shop Supply Fee on?

To turn the Shop Supply Fee on, switch Automatic Shop Supply Fee on at the top of the page, fill in the fields underneath, and click Save. You will see the message Shop supply fee updated.

  • Automatic Shop Supply Fee — the master switch. Its description reads "Setup an automatic fee that gets added to all services."

  • Fee Name — what prints on the invoice. It starts as Shop Supplies. The help text under it reads "How should this fee be displayed in the invoice?"

  • Calculation Method — how the Shop Supply Fee is worked out. Five options, listed below.

  • Percentage — the percent to charge. This field is called Amount instead when the method is As fixed amount.

  • Set Upper Limit — a cap, so a percentage fee cannot run away on a big job.

What are the five Calculation Methods?

The Calculation Method dropdown on the Shop Supply Fee page has exactly five options:

  • As fixed amount — a flat dollar figure on every service, whatever the job is worth.

  • As % on the labor — a percentage of the labor total on that job.

  • As % on the parts — a percentage of the parts total on that job.

  • As % on the subtotal — a percentage of labor and parts together.

  • As % on the total — a percentage of the whole invoice.

These are the same five options used by Preset Fees, where the dropdown is labelled Apply fee as.

Worked example: 7% of the parts

Here is a real example of the Shop Supply Fee set to a percentage. The settings were As % on the parts at 7.

A brake job was written with one brake pad set at $95.00. The Shop Supplies line came out at $6.65, because 7% × $95.00 = $6.65.

On the totals block at the bottom of the same invoice, the Shop Supplies fee is rolled into the Fees line: Fees $9.82 = Shop Supplies $6.65 + Processing Fee $3.17.

What does Set Upper Limit do?

Set Upper Limit caps the Shop Supply Fee at a dollar figure, so a percentage fee cannot get huge on a big job. Switch Set Upper Limit on and an Upper Limit box appears underneath for the dollar cap.

Worked example. With As % on the parts at 7 and an Upper Limit of $25.00, the same brake job was changed to four brake pad sets — a parts total of $380.00. Seven percent of $380.00 is $26.60, which is over the cap, so the Shop Supplies line charged $25.00 and stopped there.

Set Upper Limit only appears for the four percentage methods. Choose As fixed amount and Set Upper Limit disappears, because a flat fee has nothing to cap.

How do I charge a flat shop supply fee instead of a percentage?

To charge a flat shop supply fee, set Calculation Method to As fixed amount. The Percentage box is replaced by an Amount box with a dollar sign, and Set Upper Limit disappears.

Worked example. With As fixed amount at $15.00, a DOT (Department of Transportation) inspection was written with no parts and no labor hours yet. The Shop Supplies line still charged $15.00, because a fixed amount does not depend on what is on the job.

How do I stop charging the Shop Supply Fee to one customer?

To stop charging the Shop Supply Fee to one customer, add that customer to Excluded Customers. The section is described as "Do not add the automatic fee to these customers."

Type the customer's name in the Search Customer box and pick them from the list that drops down.

The customer is added to the list with a red bin icon beside them. Click Save to keep the change. Click the red bin to take a customer back off the excluded list.

What an excluded customer sees. A service written for an excluded customer has no Shop Supplies line at all — not a $0.00 line, no line. In the example below only the Processing Fee is left in the Fees block.

How do I exclude a whole customer group?

To exclude a whole customer group from the Shop Supply Fee, use the Excluded Customer Groups section under Excluded Customers. It is described as "Do not add the automatic fee to these customer groups." Click Select a customer group to exclude..., pick the group, and click Save.

Use Excluded Customer Groups when a whole fleet or account tier is on a contract that does not allow a shop supply charge, instead of adding every one of their companies to Excluded Customers one at a time.

How do I turn the Shop Supply Fee off completely?

To turn the Shop Supply Fee off completely, switch Automatic Shop Supply Fee off and click Save. Every field on the page disappears and only the switch and the Save button are left.

⚠️ Switching the master switch off and back on clears Set Upper Limit. When you turn Automatic Shop Supply Fee back on, check Set Upper Limit and the Upper Limit amount before you save — Set Upper Limit comes back switched off.

Where does the Shop Supply Fee show up on the invoice?

The Shop Supply Fee shows up on the service's Invoice tab, in the Fees block below the service items, using whatever you typed in Fee Name. It is listed alongside any other fee on the job, such as the Processing Fee.

The Shop Supply Fee is taxed. It carries a tick in the TAX column and it is inside the amount sales tax is worked out on. On the 7%-of-parts example: Subtotal $104.82 (which includes the $6.65 Shop Supplies fee), tax 3.9323%, Tax $4.12, Total $108.94.

The Shop Supply Fee is also inside the figure the customer sees when you send an authorization request.

Does the Shop Supply Fee get added to Parts Sales?

No — the Shop Supply Fee is not added to Parts Sales. The Shop Supply Fee only goes on services. A new parts sale shows only the Processing Fee in its Fees block; there is no Shop Supplies line.

If you want a shop supply charge on counter sales too, create it as a Preset Fee with auto-add turned on for parts sales.

If I change the settings, do jobs already on my board change?

No — changing the Shop Supply Fee settings does not rewrite services that already exist. A service written before the change keeps the Shop Supplies amount it was given, even after the invoice is refreshed. Only services created after the change use the new setup.

The Shop Supply Fee does keep up with the job itself while the job is open. On the brake job above, the Shop Supplies line moved from $6.65 to $25.00 on its own the moment the parts on that job went from $95.00 to $380.00.

Can I change or delete the Shop Supply Fee on one invoice?

Yes — you can do both, as long as the invoice has not been finalized. Click the Shop Supplies row in the Fees block on the service's Invoice tab. An Edit Fee window opens with:

  • Description — the name that prints on this invoice.

  • Apply fee as — the calculation method for this invoice.

  • Amount — the percentage or dollar figure. If the Shop Supply Fee has an upper limit set, the window shows it underneath, for example Limited to $25.00.

  • Charge Sales Tax — whether this fee is taxed on this invoice.

Then choose one of the three buttons:

  • Remove — the red button at the bottom left. This deletes the Shop Supplies line from this invoice.

  • Update — saves your changes to this invoice.

  • Cancel — closes the window and changes nothing.

Everything you do here affects this one invoice only. Your Shop Supply Fee settings and every other service are left exactly as they were.

⚠️ Do it before you finalize. Finalizing locks the invoice, and a locked invoice cannot have its fees changed or removed. If a job should not carry the fee, or should carry a different amount, sort it out while the invoice is still open.

Editing one invoice is the right move for a one-off job. If a customer should never be charged shop supplies, do not do it invoice by invoice — add them to Excluded Customers on the Shop Supply Fee page so the line never appears in the first place.

What is the difference between the Shop Supply Fee and a Preset Fee?

The difference between the Shop Supply Fee and a Preset Fee is scope and control:

  • There is one Shop Supply Fee per shop. You can have as many Preset Fees as you like.

  • The Shop Supply Fee has Excluded Customers and Excluded Customer Groups. A Preset Fee has no exclusion list, so when its auto-add is on it goes on every new job.

  • The Shop Supply Fee goes on services only. A Preset Fee can auto-add to services, to parts sales, or to both.

  • The Shop Supply Fee cap is called Set Upper Limit. The Preset Fee cap is called Limit Total Amount.

  • The Shop Supply Fee lives in Settings → Service Settings → Shop Supply Fee. Preset Fees live in Settings → System → Preset Fees.

✅ Auto-add is not your only option for a Preset Fee. A Preset Fee does not have to add itself to anything. Any fee saved in Settings → System → Preset Fees can be put on one job by hand: on the service or parts sale click Add Fee, then click the Description field — it reads "Select or create a fee" and your saved fees drop down, each with its rate shown, for example Shop Supplies — % 7 of labor. So a fee you charge only sometimes, like tire disposal or a travel charge, should still be created as a preset with auto-add left off, and picked from that list when the job calls for it.

Use the Shop Supply Fee for your shop supplies charge, because it is the only one that lets you leave certain customers out. Use Preset Fees for everything else — tire disposal, environmental, card and travel fees.

Quick answers

  • "Where is the shop supplies setting?" Your name in the top right → Settings → Service Settings → Shop Supply Fee.

  • "I don't see Settings in my menu." You are missing the Manage Service Settings permission.

  • "Shop supplies isn't showing on this job." Check three things: the Automatic Shop Supply Fee switch is on, the customer is not in Excluded Customers or Excluded Customer Groups, and the job was created after you turned the fee on.

  • "Shop supplies shows $0.00." A percentage method gives $0.00 when the thing it is a percentage of is $0.00 — for example As % on the labor on a job with no labor hours logged yet.

  • "Can I take shop supplies off just this one invoice?" Yes. Click the Shop Supplies row on the Invoice tab and click Remove in the Edit Fee window. The invoice must not be finalized.

  • "Can I change the shop supplies amount on just this one invoice?" Yes. Click the Shop Supplies row on the Invoice tab, change Amount or Apply fee as, and click Update. It affects that invoice only.

  • "I finalized the invoice and now I can't change shop supplies." Correct — finalizing locks the invoice. Sort the fee out before finalizing next time.

  • "Can I charge one customer no shop supplies?" Yes — add them to Excluded Customers on the Shop Supply Fee page, so it never lands on their jobs at all.

  • "Can I stop shop supplies going over a certain amount?" Yes — switch on Set Upper Limit and type the cap.

  • "My shop supplies fee did not update after I changed the percentage." Jobs already open keep their old amount. Only new services use the new setup.

  • "Is shop supplies taxed?" Yes — the Shop Supply Fee is inside the amount sales tax is worked out on. You can switch it off for one invoice with the Charge Sales Tax toggle in the Edit Fee window.

  • "Does shop supplies get added to a counter sale?" No — the Shop Supply Fee is services only.

Related Articles

Did this answer your question?