What is a fee in EasyTruckShop?
A fee is a charge on the invoice that is not labor and not a part. It is anything else you need to bill for: shop supplies, tire disposal, environmental charges, a credit card surcharge, mileage to drive to the truck, shipping, a scan tool plug-in charge — whatever your shop charges.
A Preset Fee is a fee you set up once in Settings so anybody at the counter can drop it on an invoice in two clicks, always with the same name and the same amount.
Same thing, different words: preset fee = saved fee = the fee list. Service = service order = work order. Parts sale = counter sale = part counter sale.
Shop supplies has its own page. Everything below is about Preset Fees. There is also a separate Shop Supply Fee at Settings → Service Settings → Shop Supply Fee — one automatic fee for shop supplies, with an Excluded Customers list and an Excluded Customer Groups list that Preset Fees do not have. Use the Shop Supply Fee for your shop supplies charge and Preset Fees for everything else.
Where do I set up preset fees?
Click your name in the top right → Settings → System tab → Preset Fees.
You will see every fee your shop has saved, with three columns: NAME, AMOUNT, and APPLY ON (which documents the fee adds itself to automatically). Click + Add Fee to make a new one.
How do I create a preset fee?
Click + Add Fee and fill in the Add Preset Fee window.
Description — the name that prints on the invoice. Write it the way you want the customer to read it, for example Tire Disposal Fee or Travel Fee $2-per/Mile.
Apply fee as — how the amount is worked out (see the next section).
Amount — the dollar amount or the percentage.
Taxable — on means sales tax is charged on the fee. Off means it is not.
Add automatically on — Service Orders and Part Counter Sales. Leave both off if you only want to add this fee by hand.
Click Create and you get "Fee created successfully".
What are the five "Apply fee as" options?
As fixed amount — a flat dollar amount. Tire Disposal Fee $6.00.
As % on the labor — a percentage of the labor on that job. Shop Supplies 7% of labor.
As % on the parts — a percentage of the parts. Environmental Fee 2% of parts.
As % on the subtotal — a percentage of labor + parts together.
As % on the total — a percentage of the whole invoice. Card Fee 3.5% of total.
As soon as you pick any percentage option, a new switch appears: Limit Total Amount.
The Shop Supply Fee page uses these same five options, under the label Calculation Method.
How do I cap a percentage fee so it does not get huge?
Turn on Limit Total Amount and a Max Amount box appears. The fee will never charge more than that, no matter how big the job is.
Example from a real job: Environmental Fee set to 2% of parts with a $25.00 cap. On a sale with $2,300.00 of parts, 2% would be $46.00 — the invoice charged $25.00.
On the Shop Supply Fee page the same cap exists under a different name: the switch is Set Upper Limit and the box is Upper Limit.
How do I make a fee not taxable?
Turn the Taxable switch off when you create or edit the preset. Every time that fee is used, Charge Sales Tax comes in already switched off, so nobody has to remember.
Proof from a real sale: adding a $45.00 non-taxable Diagnostic Scan fee moved the subtotal from $2,349.00 to $2,394.00, but the sales tax stayed at $176.18 — the fee was left out of the tax.
Check with your accountant which fees are taxable in your state — EasyTruckShop just does what the switch says.
How do I edit or delete a preset fee?
On the Preset Fees page, click the fee row. The Edit Preset Fee window opens with the same boxes, plus a red Remove. Change what you need and click Update — you get "Fee updated successfully".
How do I add a fee to a service order?
Open the service and click the Invoice tab.
Scroll to the Fees section and click + Add Fee.
Click the Description box and pick a fee from your list, or type a name for a one-time fee.
Set the Quantity and the Amount. The Total under the boxes updates as you type.
Click Save.
Where do I add the fee on the invoice? In the picture below: 1 = the Invoice tab. 2 = + Add Fee in the Fees section.
How do I charge per mile, per tire, or per day?
Use the Quantity box. The fee charges Amount × Quantity.
Per mile example. Preset called Travel Fee $2-per/Mile at $2.00 fixed. The truck was 42 miles out, so the staff puts 42 in Quantity. Total: $84.00.
The same trick covers 4 tires × $6.00 tire disposal = $24.00, 12 gallons × $3.00 oil disposal, or 3 days × $75.00 storage.
⚠️ Put the unit in the fee name
The invoice line shows the fee name and the total, but not the quantity. A 42-mile trip prints as one line: Travel Fee $2-per/Mile … $84.00. Name your fee so the customer can do the math — Travel Fee $2-per/Mile, Tire Disposal $6 ea, Storage $75/day.
What do fees look like on the finished invoice?
Each fee is its own line in the Fees section, and they all add into one Fees figure in the totals block, next to Labor, Parts and Discount.
How do I add a fee to a parts sale?
Open the parts sale. In the SUMMARY panel on the right, under Fees, click Add fee. It is the same window as on a service — pick a preset or type a one-off, set quantity and amount, save.
How do I make a fee add itself to every job automatically?
In the preset, turn on Add automatically on → Service Orders, Part Counter Sales, or both. The APPLY ON column on the Preset Fees page shows which ones are set.
From then on, every new service order or parts sale opens with that fee already sitting in the Fees section. Percentage fees show $0.00 until there is labor or parts on the job, then they work themselves out.
A new parts sale does the same, and the cap is applied straight away.
Ideas: what do shops actually charge fees for?
Anything that is not labor and not a part. Here is how other truck shops use them.
Charged by the unit — use the Quantity box
Mobile service/road call mileage — $2.00 per mile, quantity = miles driven. The most common one for shops that go to the truck.
Tire disposal — $6.00 per tire, quantity = number of tires.
Used oil, coolant or DEF disposal — a few dollars per gallon, quantity = gallons pulled out.
Yard or storage — $75.00 per day, quantity = days the unit sat waiting on parts or on the customer.
Filter or DPF disposal — per filter.
Charged as a percentage — set it and forget it
Shop supplies — 7% of labor, capped. Rags, brake clean, zip ties, gloves, grease. Better set up on the Shop Supply Fee page — see the note below.
Environmental / haz-mat — 2% of parts, capped.
Credit card or processing surcharge — many shops use 3.5% of total. Add it by hand to jobs paid by card; it is not added automatically. See How do I charge my customer a credit card fee?
Fuel surcharge — a percentage of the total when diesel is high.
Body shop materials — a percentage of labor for paint, primer, masking.
Charged as a flat amount
Diagnostic scan / plug-in fee — a set charge for hooking up the laptop, whether or not you find the fault.
After-hours, weekend or holiday call-out — a flat call-out on top of labor.
Freight, shipping or hot-shot delivery — what the supplier charged you to rush the part in.
Rush / expedite fee — for jumping the queue.
A/C refrigerant recovery.
Welding gas and consumables.
DOT inspection sticker or paperwork fee.
Towing or recovery you paid for and are passing on.
Tip
Set up the fees you charge on almost every job (shop supplies, environmental) with Add automatically on turned on, and leave the occasional ones (mileage, after-hours, freight) turned off so the counter adds them only when they apply.
What EasyTruckShop cannot do with fees right now
A fee you type on an invoice is not saved to your list
If you type a brand new fee name straight into the Add Fee window on a service or sale, it is a one-time fee for that job only. It does not appear in Settings afterwards and it will not be in the drop-down next time.
Permanent fees can only be created in Settings → System → Preset Fees. If you find yourself typing the same fee twice, go and save it properly.
Auto-add only works on new jobs
Turning on Add automatically on affects service orders and parts sales created after that. Jobs already open on your board do not pick the fee up — add it by hand on those.
Changing a preset does not change jobs already written
If you change a preset from $6.00 to $8.00, every service and sale that already has that fee keeps the old amount. Only new lines use the new amount. That is usually what you want, but it means a price change has to be fixed by hand on any open jobs.
The quantity is not printed on the invoice
The fee line shows only the name and the total. See the warning above — put the unit in the name.
The fee list does not show taxable or the cap
The Preset Fees page only shows Name, Amount and Apply On. To see whether a fee is taxable or has a Max Amount, you have to click into it.
Preset Fee auto-add is all or nothing
A Preset Fee auto-adds to every service order or every parts sale. You cannot make a Preset Fee auto-add for only certain customers, certain trucks, or certain service types.
Shop supplies is the exception. The Shop Supply Fee at Settings → Service Settings → Shop Supply Fee adds itself to every new service and does have an Excluded Customers list and an Excluded Customer Groups list. Use it if you need shop supplies on every job except a few accounts. It goes on services only, not on parts sales.
Percentage fees count the whole document
"% on the parts" includes the core charge lines too. On a sale with a $1,850.00 turbo and a $450.00 core, the 2% was worked out on $2,300.00.
My fee is not showing up or the invoice will not sync — what do I check?
Is the job older than the fee? Auto-add only applies to jobs created after you set the fee up.
Is the toggle on for the right document? A fee set to Service Orders only will not appear on a parts sale.
Is it a percentage with nothing to work from? A "% of labor" fee stays at $0.00 until labor is on the job.
Is it the shop supplies fee? If the missing line is shop supplies, check the Shop Supply Fee page instead — the customer may be in its Excluded Customers or Excluded Customer Groups list.
Are you connected to QuickBooks? If your shop syncs to QuickBooks, every kind of line — including fees — needs a matching Product or Service on the QuickBooks side, or the sync will fail. See Connecting QuickBooks: Setting Up Income Mapping.













