Skip to main content

Parts Flow: The Three Inventory Types and Min/Max Stock

Keep in stock, Special Order and Not Tracked — what each type changes, and what Min and Max stock do.

Written by Vladimir

What are the three inventory types, and which should I use?

You choose the type when you create the part, under Parts → Inventory → Add Part. The type changes what the rest of the form even shows you.

Keep in stock — parts you buy in bulk and keep on the shelf: filters, oil, brake pads, wiper blades. You get a Location, an Initial Stock count, a Packing Quantity, and Enable low stock alerts with Min and Max.

Special Order — parts you only buy when a job needs them: a turbo, a steering gearbox, a bumper. You get a Stock field and a Packing Quantity, but no Min/Max, and the Location toggle is off by default. EasyTruckShop tells you plainly: "All special order parts without location are stored in Unassigned location."

Not Tracked — things you never want to count: shop rags, zip ties, sealant. The whole Inventory section disappears. No stock, no location, no packing quantity, and no Contains Core toggle.

You can always tell which type a part is: open it from Parts → Inventory and look just above the part number. It says STOCKED PART, SPECIAL PART or NOT TRACKED PART.

What do Min and Max stock actually do?

They only exist on Keep in stock parts, and only when you switch on Enable low stock alerts. The tooltip says it exactly:

"Send alerts and create purchase order requests when stock reaches the minimum level."

So:

  • Min is the trigger. When stock drops to or below Min, EasyTruckShop raises a request.

  • Max is the order-up-to number. The request asks for enough to fill you back to Max.

Example: brake pads set to Min 2 / Max 10. Stock ran down to 0, and a row appeared on Parts → Out of stock showing FOR = Inventory, NEEDED = 10 ea. with "0 ea. in stock" in red. Nobody had to notice — the request made itself.

Related Articles

Related:

Did this answer your question?