Skip to main content

How Parts Flow Through EasyTruckShop: Inventory, Receiving, Services and Returns (Original)

The full path a part takes — how you set it up, how it gets on a service, what out of stock means, correcting stock, virtual parts, ordering, receiving and returns.

Written by Vladimir

How parts flow through EasyTruckShop

A part in EasyTruckShop always travels the same path, no matter which door it comes in by:

Set up the part → it sits in Inventory (or not) → it goes on a service or a counter sale → if you don't have it, it lands on Out of stock → you order it → you receive it → anything left over goes to Returns.

This article walks that whole path. If you only have one question, jump to the heading that matches it.

⚠️ Can't find a button or a page this article talks about? It is usually permissions. What you can see and do depends on your user's Role, and a user can also be limited to certain shop locations. The shop owner or an admin can check it under Settings → System → Users. If the option is still missing after that, message us and we will look.

💡 Not sure where to start? The first thing to know about any part is its Inventory Type — Keep in stock, Special Order or Not Tracked. Almost every "why did it do that?" question about parts comes back to which of the three it is.

What are the three inventory types, and which should I use?

You choose the type when you create the part, under Parts → Inventory → Add Part. The type changes what the rest of the form even shows you.

Keep in stock — parts you buy in bulk and keep on the shelf: filters, oil, brake pads, wiper blades. You get a Location, an Initial Stock count, a Packing Quantity, and Enable low stock alerts with Min and Max.

Special Order — parts you only buy when a job needs them: a turbo, a steering gearbox, a bumper. You get a Stock field and a Packing Quantity, but no Min/Max, and the Location toggle is off by default. EasyTruckShop tells you plainly: "All special order parts without location are stored in Unassigned location."

Not Tracked — things you never want to count: shop rags, zip ties, sealant. The whole Inventory section disappears. No stock, no location, no packing quantity, and no Contains Core toggle.

You can always tell which type a part is: open it from Parts → Inventory and look just above the part number. It says STOCKED PART, SPECIAL PART or NOT TRACKED PART.

What do Min and Max stock actually do?

They only exist on Keep in stock parts, and only when you switch on Enable low stock alerts. The tooltip says it exactly:

"Send alerts and create purchase order requests when stock reaches the minimum level."

So:

  • Min is the trigger. When stock drops to or below Min, EasyTruckShop raises a request.

  • Max is the order-up-to number. The request asks for enough to fill you back to Max.

Example: brake pads set to Min 2 / Max 10. Stock ran down to 0, and a row appeared on Parts → Out of stock showing FOR = Inventory, NEEDED = 10 ea. with "0 ea. in stock" in red. Nobody had to notice — the request made itself.

Where do I see everything that ever happened to a part?

Open the part from Parts → Inventory and use the History tab. Every movement is listed with who did it, the quantity, where it came FROM, where it went TO, the WAC (weighted average cost) at that moment, and the STOCK AFTER.

The other tabs on the part are Usage (which services used it), Orders (every PO it was on), Returns and Attachments.

This tab is the answer to almost every "where did my part go?" question. It shows you the shelf name, the service number, the sale number, the credit number — the whole trail.

How do I add a part to a service?

Open the service, open the service item, click Parts, search the part, set the Quantity, then click + Add Part.

You can also add a part from the service's Parts tab (the + Part button on each service item) or from the Invoice page (+ Add Part). Both open the same small Add part to… window.

The search drop-down already tells you a lot before you add anything:

  • A Keep in stock part shows how many you have and the bin location (green pin, e.g. "Parts Room A / Shelf 1").

  • A Special Order part shows the quantity, which is usually 0 — that is normal for this type.

  • A Not Tracked part shows no quantity at all, because nothing is being counted.

What happens if I use more parts than I have in stock?

EasyTruckShop takes what it can off the shelf and marks the rest as missing. It does this silently — you get the ordinary "The Part is added to the service item" message and nothing else.

Example: you have 4 brake pad sets and you add 6. You end up with two lines for the same part number:

  • 4 ea. — Received (taken out of stock)

  • 2 ea. — Out of Stock (still owed to the job)

⚠️ This is the number one thing people get confused by. Seeing the same part twice on one job does not mean it was added twice. One of the lines is stock you already had; the other is stock you still owe. Check the status badge before you delete anything.

What does each status badge mean?

A part on a service moves along this ladder:

Out of Stock → Ordered → Received

  • Out of Stock (red) — you do not have it. It is sitting on the Out of stock page waiting to be ordered.

  • Ordered (blue) — it is on a purchase order. The PO number shows next to it.

  • Received (green) — it is physically here and assigned to the job.

  • Canceled (orange) — the line was removed from the job. It stays visible on the service's Parts tab so you can see what happened.

  • No badge — a Not Tracked part on the service-item list. Nothing is being counted, so there is nothing to track.

What is the Out of stock page for?

Parts → Out of stock is your shopping list. Everything the shop needs and does not have is here, whether a service needs it, a counter sale needs it, or your Min stock level triggered it.

The tabs across the top split it up: All, Services, Parts Sales, Inventory. The FOR column tells you who is waiting for it — a service number, a sale number, or the word Inventory for a Min/Max restock. A small red padlock next to the FOR entry means that job or sale has already been finalized.

⚠️ The search box on this page searches part numbers and descriptions, not service numbers. Typing a job number like "0833" returns nothing. Search the part instead, or use the Services tab.

The part is actually on the shelf — how do I correct the stock?

This happens constantly: the system says 0, but there are two sitting right there. There are two places to fix it, and they are not the same.

From the part itself (recommended)

Parts → Inventory → ⋮ → Correct stock, or the Correct button at the top of the part page.

This version asks you for Correction cost per unit and pre-fills it with what the part costs you, so the part keeps its real value. You get Location (on stocked parts), Stock after Correction, a Reason that switches itself between Found inventory and Lost inventory, a live Total Correction value, and a required Note.

From the Out of stock page

Click the ⋮ at the end of the row. You get three choices: View Part, Correct Stock, Remove.

Choose Correct Stock and you get a dialog built around the job that is waiting:

  • Destination and Quantity to order — who is waiting and for how many

  • Stock before correction

  • Correction quantity — the "add" field, pre-filled with the quantity that is short

  • Stock after correction and Remaining to order — both update live as you type

  • Reason for correction

Click Correct and you get "Inventory Correction applied". The row disappears from the Out of stock page and the service line flips from Out of Stock to Received. Your reason is saved on the part's History tab, shown as coming FROM "Found inventory".

⚠️ Correcting from the Out of stock page brings the parts in at $0 cost. That version of the dialog has no cost field, so the correction is written to History with a WAC of $0.00 and it pulls the part's weighted average cost down. If the cost matters to you, correct the stock from Parts → Inventory → ⋮ → Correct stock instead — that one asks for the cost and keeps it. Also expect the job to keep two separate lines (4 ea. and 2 ea.) rather than merging back into one line of 6. That is normal.

How do I order the parts I'm missing?

Two ways, and they end up in the same place.

From the Out of stock page — tick the rows you want and click Order Selected. EasyTruckShop builds the purchase order for you with the right destination already set.

From the service — open the service's Parts tab and click Order Parts. This opens a new order with Auto Assign to Service already pointing at that job, so every line you add goes to it.

For the full receiving walkthrough see How to Receive a New Purchase Order, and for parts that arrive late see How to Receive Back-Ordered Parts.

What does the yellow "Conflict Detected" message mean?

When you put a part on a purchase order and that same part is already showing out of stock somewhere, a yellow bar appears under the line:

"Conflict Detected — Service #0754 has 5 ea. showing out-of-stock."

You get one bar for each place the part is needed. If a job needs it and your Min stock also triggered a restock, you will see two bars stacked, each with its own buttons.

Each bar gives you two choices:

  • Assign to Service #xxxx (or Assign to Inventory) — links this order line to that waiting request. This is almost always what you want. It sets the quantity and the destination for you. When you save the order, the request leaves the Out of stock page and the service line changes to Ordered with the PO number on it.

  • Ignore — leaves the line as a brand new order line and leaves the request open. Use it when you really are ordering extra, on top of what the job needs.

⚠️ Ignore applies to the whole order, not just that line. Once you click Ignore, no other line you add to that order will warn you about the same request again. If you add the part three or four times, only the first line ever tells you. Check the Out of stock page before you save a big order.

What do the purchase order statuses Pending, Will-Call and Delivery mean?

They are notes to your own team. Changing the status does not contact the vendor. To email the order to your vendor, open the purchase order, click the share icon (the arrow next to the Delivery / Will-Call button) at the top right and choose E-mail. The vendor's email is filled in and the order goes as a PDF. You can also call the vendor or order on their website. Then move the status here so everyone in the shop can see where it stands.

  • Pending — you have built the order but not placed it yet.

  • Will-Call — placed, and somebody is going to pick it up at the counter.

  • Delivery — placed, and the vendor is bringing it.

You do not have to set a status at all. Clicking Save creates the order either way.

Should parts be received into inventory or straight to the service?

Both work, and the difference is the DESTINATION column on the purchase order line.

Destination = Inventory. The parts land on the shelf, stock goes up, and the weighted average cost updates. Anyone can then pull them onto any job. This is right for the things you keep in stock.

Destination = Service #xxxx. The parts go straight to that job and never touch your shelf count. This is right for special orders and for anything bought for one truck. When you order from a service, or use Order Selected on an out-of-stock service row, EasyTruckShop sets this for you.

You can change it on any line with the Change link next to the destination.

💡 Receiving a stack of parts by hand is slow. The Receive PO AI Reader reads the vendor's invoice and fills the lines in for you.

What is the B/O column, and what if the vendor only sends part of my order?

B/O stands for Back Order. The tooltip on the column says it exactly: "Back Order. This is the quantity that your vendor will ship you later."

So when the driver turns up with less than you ordered, you do not edit the quantity you ordered. You put the shortfall in B/O.

Example: you ordered 5 brake pad sets at $120 and only 3 arrived.

  1. Leave QTY at 5.

  2. Type 2 in B/O. The line total immediately drops from $600.00 to $360.00 — you are only being billed for what turned up.

  3. Click Receive, put the vendor's invoice number in Reference Number, and click Receive.

What happens to the order after that?

EasyTruckShop splits the PO into an Order Group — one PO number, two orders inside it, shown in the Linked Orders panel on the right:

  • 732 — Received, with the reference number and the $360.00 you actually got

  • 732 — Ordered, holding the $240.00 still owed to you

Click Overview in that panel to see the whole picture at once: ORDERED, RECEIVED and STATUS per line, so you can see 3 of 3 ticked off and 2 still Ordered.

When the rest arrives, open the Ordered order in that group and receive it. Nothing has to be re-typed.

And on the service?

The job's single 5 ea. line becomes two lines: 3 ea. Received and 2 ea. Ordered, both showing the same PO number. The technician can start on the three that are here.

⚠️ Receiving more than the job asked for is not blocked. If you raise the QTY on a service-destined line above what the job needs, the extra goes onto the job too — not into inventory — and you get no warning. A job that asked for 5 can quietly end up with 6, and the customer is billed for it. If you bought extra on purpose, put the extra on its own line with the destination set to Inventory.

What is a virtual part, and when should I use one?

A virtual part is a placeholder. It is for the moment when you are on the phone with a dealer getting a price and you do not have a part number yet — or the part simply is not in your system.

You type the name straight onto the part line and click Add Part. EasyTruckShop creates the line and marks it virtual in orange. No part record is created in your inventory.

⚠️ A virtual part can only be added from the service item page. Open the service, open the service item (the complaint), click Parts, and type the name there. The + Part button on the service's Parts tab and + Add Part on the Invoice page only find parts that are already in your system — type a name that does not exist and you just get "No results for …".

How do I put the price on a virtual part?

Click the line again. The Edit assigned part window opens, and because it is virtual you get a Cost field as well as Sales Price — a normal part only lets you change the sales price. There is also an Edit button if you want to rename it.

Type the price the dealer quoted you, click Update, and the customer's estimate is right straight away.

Where does a virtual part show up?

On Parts → Out of stock, exactly like any other missing part, with virtual next to the name and the service it is for in the FOR column. So it does not get forgotten.

How does a virtual part turn into a real part?

This is the part that matters. The virtual line is only a placeholder — you turn it into a real part when you order it.

  1. On Out of stock, tick the virtual row and click Order Selected. A purchase order is created with the destination already set to the service.

  2. On the order line you will see an Add Details button next to the name. Click it.

  3. The Add new Part window opens with the name and the cost you typed already filled in. Give it a real Part Number, a Vendor and a Description. Open Advanced Settings if you want to set the inventory type, stock or location.

  4. Click Add. The line stops being virtual and becomes your new part.

  5. Receive the order. The service line now shows the real part number with a green Received badge and the PO number.

⚠️ Virtual parts do not have a history. Nothing is counted, nothing is costed, and there is no part page to look back at. Use them to move fast when you do not know the part yet — but for anything you will buy again, receive it properly or add it from inventory. Also note: once the virtual becomes a real part, the sales price is recalculated by your price matrix, so a price you typed by hand on the virtual line can change.

⚠️ Watch out for accidental virtual lines on a purchase order. If you type a part number onto an order line and click Add without picking the real part out of the drop-down, EasyTruckShop creates a virtual line with that part number at $0.00 cost. It looks almost identical to the real line. Always pick the part from the drop-down. To get rid of one, tick the row's checkbox → Bulk Edit → Remove → confirm.

What happens if the invoice is already finalized?

Finalizing the invoice locks the service. You can still finish the parts work.

Finalizing with a part still on order gives you a warning, not a block: "Are you sure you want to finalize the invoice? This invoice has 1 error", listing the part that has not been received. You can click Yes I am sure and finalize anyway.

After the service is locked, any purchase order line pointing at it shows a red padlock next to the destination and the row turns pink. That is EasyTruckShop telling you the job is closed.

You can still receive it. Receiving works normally, and the line on the locked service changes from Ordered to Received.

Can I change or remove a part on a locked service?

No. Once the invoice is finalized, the part lines go read-only everywhere — the service's Parts tab, the service item, and the Invoice page. Clicking a part row does nothing at all; the Edit assigned part window will not open.

To change anything, click Unlock at the top of the service first. If the customer has already paid and you are giving money back rather than editing the job, use Credit on the invoice instead — see below.

How do parts work on a Part Counter Sale?

Parts → Sales → + New Sale. Pick the company and the contact, then add part lines the same way you would on a service.

The three inventory types look different on the line, just like they do on a service:

  • Keep in stock — shows how many you have and the shelf it is on

  • Special Order — shows how many you have, usually a small number or zero

  • Not Tracked — shows nothing, because nothing is counted

If you type a quantity bigger than you have, the number turns red. That is the only warning you get.

Nothing happens until you Finalize

A saved sale is an Estimate. While it is an estimate, no stock moves and nothing appears on the Out of stock page — you can build a quote for a customer without touching your inventory.

When you click Finalize, everything happens at once:

  • Stock comes off the shelf for what you had.

  • Anything you did not have splits onto its own line with a red Out of Stock badge — exactly like a service.

  • A row appears on Parts → Out of stock with FOR = Sale #xxxx, so you can order it from there.

After finalizing, the sale gets its invoice number and the buttons change to Mark Billed, Credit, Pay and Unlock.

How do I change or remove a part on a service?

Click the part line. That opens the Edit assigned part window, and it works from all three places a part is shown:

  • the service item page — open the service item, click Parts, then click the part

  • the service's Parts tab

  • the Invoice page

It is the same window every time. From it you can:

  • change the Quantity and the Sales Price, and turn Charge sales tax on or off

  • Change Part — swap this line for a different part

  • Move — send the part to a different service item on the same job

  • Remove — take it off the job

Click Update to save your changes, or Cancel to close without saving.

What happens when I remove a part?

It depends on the part's inventory type. This is the single biggest difference between a stocked part and a special order part, and it catches people out.

Keep in stock — it just goes back on the shelf

You are asked nothing about where the part should go. You get a plain confirmation — "Delete Part from Service Item — Are you sure you want to delete this part from this service item?" — and after Yes, Delete the toast says "Part is returned".

The part goes straight back into inventory, to the exact bin it came from, and your stock count goes back up. Nothing lands on the Returns page. That is correct: it is your own shelf stock and it is going back where it lives.

Special Order — you get asked where it should go

Because a special order part was bought for one truck, EasyTruckShop will not guess. It opens Select Return Destination and asks: "What do you want to do with removed part?"

  • Send to Return Shelf — Inventory will not increase. The part lands on Parts → Returns as Ready for Return, with the service as its Origin. This is the default, and it is what you want when the part is going back to the vendor for a credit. Toast: "Removed part was sent to Return Page".

  • Return to Inventory — Part will be added to stock. Use this when you have decided to keep it on the shelf for the next truck.

Out of Stock lines and Not Tracked parts

An Out of Stock line has nothing to return, because nothing ever arrived. It just disappears and the request comes off the Out of stock page. No question, no Returns row.

A Not Tracked part has no stock to give back either, so it simply comes off the job.

Where does the removed line go?

It vanishes from the service item parts list, but it is not gone. Look at the service's Parts tab and you will find it sitting there with an orange Canceled badge, so there is always a record of what was on the job and what came off it.

And if you want to prove where the part physically went, open the part and look at History. A stocked part shows TO = your shelf. A special order part shows TO = Returns.

What is the Returns page?

Parts → Returns is the return shelf. It holds parts that have left a job, a sale or a credit but have not gone back to the vendor yet. Everything shows its Origin — the service, sale or credit it came from — so you can always trace it, plus a TYPE of New or CORE.

The filters across the top are All, Waiting to receive, Ready For Return, Returned, Not Accepted and Canceled. Waiting to receive is the useful one when several jobs are open and you want to see everything still owed back to you.

How do I actually send a part back and get the credit?

Click the ⋮ at the end of a Ready For Return row. The Return Part window opens and asks where the part is really going:

  • Vendor — Send the part back to the vendor and get a refund.

  • Inventory — Place the part back into your inventory for future use.

  • Trash — This part is so damaged, and can not be resold.

Under that you get a Return Receipt number (put the vendor's credit memo number here) and a Credit amount per unit, pre-filled with what you paid, with the expected credit shown underneath. Click Return and the toast says "Part return marked as returned". The row moves to the Returned filter.

💡 Coming soon. Easy Truck Shop is building a new, more advanced return process. It will make it much easier to track exactly where a part went.

How do I credit a part back to the customer?

A return is between you and your vendor. A credit is between you and your customer. They are two different screens.

Open the finalized part sale or the finalized service invoice and click Credit. You then pick one of two types:

  • Credit Memo — Store credit. Can be used to pay for other invoices.

  • Refund — Returns the funds back to the customer.

Every line on the invoice is listed with how much is AVAILABLE to credit. Tick the lines you want; the quantity fills in for you and you can type a smaller number for a partial credit. Fees can be credited too. Add a Note so the reason is on the record, then click Create Credit Memo or Create Refund.

Where does the part itself go after a credit?

The same rule as removing a part from a job, and again you are not asked:

  • A Keep in stock part goes straight back to its shelf and your stock count goes up. Nothing appears on the Returns page.

  • A Special Order part goes to Parts → Returns as Ready for Return, with the credit number as its Origin, so you can send it back to the vendor from there.

The credit itself is saved with its own number and lives under Customers, showing the sale it came from, the contact, the note and the totals.

Quick answers

"I can't see a button, a page or an option this article describes." — It is almost always permissions. What you can see depends on your user's Role, and a user can also be limited to certain shop locations. Ask the shop owner or an admin to check Settings → System → Users.

"Why is the same part on my job twice?" — You asked for more than you had. One line is stock you had, one line is stock you still owe. Check the badges.

"How do I change the quantity or price of a part?" — Click the part line, on the service item, the Parts tab or the Invoice. The same Edit assigned part window opens from all three.

"Why did it ask me where to return one part but not the other?" — Because of the inventory type. A Keep in stock part always goes back to its shelf without asking. A Special Order part asks, because it was bought for that one truck and usually goes back to the vendor.

"I removed a part from a job and it is not on the Returns page." — Then it was a stocked part, and it went back into inventory instead. Check the part's History tab — it will show the shelf it went to.

"Where did my removed part line go?" — It is on the service's Parts tab with a Canceled badge. It is hidden on the service-item list, not deleted.

"The vendor only shipped half my order." — Leave QTY as ordered and put the shortfall in the B/O column, then receive. EasyTruckShop keeps the rest as a linked back order under the same PO number.

"My part sale did not create an out-of-stock request." — It is still an Estimate. Nothing moves until you Finalize the sale.

"I can't click the parts on this invoice." — The invoice is finalized. Click Unlock on the service first, or use Credit if you are giving money back rather than editing the job.

"The part is on the shelf but the system says out of stock." — Parts → Out of stock → ⋮ → Correct Stock. Add the quantity, give a reason, done. If the cost matters, correct it from Parts → Inventory → ⋮ → Correct stock instead, because that version asks for the cost.

"I ordered it, why is it still red?" — Red means Out of Stock. If you clicked Ignore instead of Assign to Service on the conflict bar, the order line is not linked to the job's request. Assign it, or order it again from the Out of stock page.

"I typed a part name and it says No results." — That window only searches parts already in your system. To add a part you do not have yet, go to the service item page and type the name there — that creates a virtual part.

"Where did my hand-typed price go?" — On a virtual part, the sales price is recalculated from your price matrix once it becomes a real part.

"I don't want to count this part." — Set the part's Inventory Type to Not Tracked.

"How do I change the shelf a part lives on?" — Open the part from Parts → Inventory, click Edit, and set the location there.

"How do I group my parts for reporting?" — See How to Create and Use Parts Categories.

Still stuck? Message us from the chat bubble in EasyTruckShop with the part number and the service number and we will trace it with you.

Did this answer your question?