Skip to main content

How to Process a Core Return (Original)

How to handle cores in EasyTruckShop: the core charge on the invoice, marking a core returnable, processing the return, undoing it, and the current limits.

Written by Vladimir

What is a core in EasyTruckShop?

A core is the old unit you take off the truck and send back to the vendor to get money back. Turbochargers, starters, alternators, injectors, water pumps, and clutch kits usually have one.

The vendor charges you a core value on top of the part price. When the old unit goes back, the vendor gives that money back as a core credit.

Same thing, different words: core value = core charge = core deposit. Service = service order = work order. Marking a core Returnable is the same as marking it Ready for return.

The example in this article is part TC-5010477RX — TURBOCHARGER DETROIT DD15 REMAN, cost $1,200.00, price $1,850.00, core value $450.00.

How does a part get a core?

There are two ways, and both end up in the same place — the core lives on the part record.

1. On the part itself

Go to Parts > Inventory, open the part, and click Edit (or click Add Part for a new one). In the Pricing section, turn on Contains Core, then type the Core Value the vendor charges you. Save.

2. While you are receiving parts

You can also add the core when the parts come in. On the receiving screen turn on Show Core at the bottom right. A CORE column appears on the part lines. Type the core value there and it is added to that line's total.

After you receive, the core shows on the same part line with a yellow CORE tag.

Doing this also turns that part into a core part from then on — the part record now shows a CORE badge and the core value you typed.

Where do I see the core charge on the invoice?

Open the service and click the Invoice tab. A core part always makes two lines:

  • The Part line — $1,850.00

  • The Core line right under it — TURBOCHARGER DETROIT DD15 REMAN | Core Charge, $450.00

That second line is the core. The subtotal is $2,300.00 until you decide what happens with it.

How do I mark a core returnable or not returnable?

Click on the Core line on the invoice. The Edit Core return window opens. This is where you decide who pays for the core.

Toggle ON — the core goes back to the vendor

Charge to customer shows $0.00, and the button says Mark Returnable. Click it. You get "Core marked as Ready for return", the core line drops to $0.00, the subtotal drops to $1,850.00, and the core moves to Parts > Returns waiting for you to ship it.

Toggle OFF — the customer pays for the core

Charge to customer shows $450.00 and the button changes to Not Returnable. Click it, and you get "Core marked as not returnable". The core charge stays on the invoice.

Use Not Returnable when the old unit is broken, cracked, burned, missing pieces, or the vendor will not take it. You cannot get your money back from the vendor, so the customer covers it.

What happens if I do nothing with the core?

The customer pays. If you never open that second line, the core charge stays on the invoice at full value, and the invoice shows a red note: "1. The core for this part has not returned." If the old unit is good, open the line and mark it returnable — otherwise you are charging the customer money you could have gotten back from the vendor.

How do I see which services still have cores to collect?

Go to Parts > Returns and click the Waiting to receive tab. This is your list of every core that is still sitting on a job with no decision made yet — status Check Conditions.

The ORIGIN column shows the service number and the service item under it, so you can see exactly which jobs you still need to pull cores off. When you have a lot of services open at once, this is the page to work from.

How do I finish the core return and record the vendor credit?

  1. Go to Parts > Returns and open the Ready For Return tab. Your core is there with TYPE = CORE and the service number in ORIGIN.

  2. Click the core row. The Return Core window opens.

  3. Type the Return Receipt number from the vendor's credit memo.

  4. Check the Core Credit. It fills in with the expected amount per core.

  5. Click Return. You get "Core Returned," and the row moves to the Returned tab.

What if the vendor gives me less credit than the core value?

Type the real amount in Core Credit. The Balance updates and turns red. Core worth $450.00, vendor credits $300.00, balance shows -$150.00 — that is money your shop is out. You can still save it, so your books show what really happened.

Can I undo a core that was already sent to the vendor?

Yes. This comes up when the customer denies the repair after the core already went out, or you typed the wrong credit.

  1. Go to Parts > Returns > Returned and click the core row.

  2. Click Unlock. You get "Return unlocked".

  3. The returnable question comes back. You must now click Mark Returnable or Not Returnable.

If you click Mark Returnable, the core goes back to Ready For Return and keeps the receipt number and credit you typed, so you can fix them and return it again. If you click Not Returnable, the core charge goes back onto the customer's invoice.

⚠️ Do not click Cancel after Unlock

After you click Unlock, closing the window

with Cancel instead of picking Returnable or Not Returnable will make the core record disappear from the Returns page completely. The vendor credit you had recorded is lost, and there is no row left to find it. Always finish the choice. (This is an ongoing bug; Easy Truck Shop is aware and working on the fix)

What do the core statuses mean?

  • Check Conditions — the core is on the job and nobody has decided yet. Shown on the Waiting to receive tab.

  • Ready for Return — marked returnable, waiting to be shipped to the vendor and credited.

  • Returned — the core went back and the vendor credit is recorded.

  • Not Accepted — marked not returnable. The customer pays the core charge.

  • Canceled — the part was removed from the service order, so the core record was voided.

What EasyTruckShop cannot do with cores right now?

These are the current limits. Knowing them saves you a phone call.

Cores are all or nothing, even with more than one

If a service has 4 of the same part, EasyTruckShop treats the 4 cores as one record. There is one Can this core be returned? toggle for the whole line — either all 4 cores are returnable or all 4 are charged to the customer. There is no field to split the quantity.

The same is true when you process the return. Core Credit is per core and there is no quantity box, so you cannot record "the vendor took 3 and rejected 1."

Workaround: divide the total credit the vendor actually gave you by the quantity and enter that as the per core amount. For 4 cores where the vendor only credited 3 at $450, enter $337.50 per core. The balance will show the shortfall. It is not pretty, but the money is right.

Removing the part cancels the core

If you remove the part from the service order, the core record is set to Canceled — even if you already sent the core back and recorded the vendor credit. Fix the part line first and handle the core at the end.

Cores are not their own line when receiving

When you receive parts, the core is a column on the part line, not a separate line. It is added into that line's total.

The core line locks when the invoice is finalized

After you finalize, clicking the core line on the invoice does nothing. You can still finish the return from Parts > Returns. To change returnable / not returnable, click Unlock at the top of the invoice first.

Quick checklist

  1. Part has Contains Core ON with a Core Value (set on the part or while receiving).

  2. Add the part to the service item — you will see the yellow CORE tag.

  3. Do the job. Keep the old unit clean, drained, and in the new part's box.

  4. Open the Invoice tab and click the second line, Core Charge.

  5. Old unit is good → Mark Returnable. Old unit is junk → Not Returnable, and the customer pays.

  6. Ship the core, then go to Parts > Returns > Ready For Return, enter the vendor receipt number and credit, and click Return.

  7. Check Waiting to receive now and then to catch cores still sitting on open jobs.

Coming soon

Easy Truck Shop is building a new, more advanced Return process. It will make cores, vendor credits and returned parts easier to track and will address the limits above. Everything in this article keeps working until then.

Did this answer your question?