Skip to main content

How do I type hours in a Duration box? (Why 12 turned into 0:12)

A plain number under 10 is read as hours, 10 or more is read as minutes. To enter 10 hours or more, type it with a colon, like 12:00.

Written by Vladimir

How does the Duration box read what I type?

The Duration box on a service template and the Estimated Duration box on a service item use hours and minutes (hh:mm). When you type a plain number without a colon, EasyTruckShop decides what it means by its size:

  • A number under 10 is read as hours. Type 4 and it becomes 4:00 (4 hours).

  • A number of 10 or more is read as minutes. Type 12 and it becomes 0:12 (12 minutes). Type 90 and it becomes 1:30 (90 minutes).

To enter 10 hours or more, type the hours with a colon: 12:00 for 12 hours, 400:00 for 400 hours.

Where do I type 12 hours on a service template? In the picture below, 1 = the Duration box with 12:00 typed in, which is 12 hours. Typing just 12 would give 0:12, which is 12 minutes.

The Duration box on a new EasyTruckShop service template with 12:00 typed in, meaning 12 hours, under the Labor Type box.

What does each entry turn into?

Tested on 18 Nov 2026. Type the value, then click out of the box or press Tab.

You type

It becomes

Meaning

3

3:00

3 hours

9

9:00

9 hours

10

0:10

10 minutes

12

0:12

12 minutes

90

1:30

90 minutes

400

6:40

400 minutes

1:30

1:30

1 hour 30 minutes

12:00

12:00

12 hours

400:00

400:00

400 hours

1.5

1:00

Decimals do not work. Type 1:30 for an hour and a half.

I typed 12 for a 12-hour job and it saved as 12 minutes. How do I fix it?

Open the template or service item again, click into the Duration box, delete what is there, type 12:00, click out of the box, and save. Any job of 10 hours or more needs the colon.

Can I type hours as a decimal, like 1.5?

No. Use hours and minutes with a colon: 1:30 for an hour and a half, 0:45 for 45 minutes, 2:15 for two and a quarter hours.

How do I enter just minutes, like a 20-minute job?

Type 20 (it becomes 0:20), or type 0:20.

My duration saved as 1:00 even though I typed something else

1:00 is the starting value of a new template. If the box did not take your entry, the template saves with 1:00. After typing, click out of the box or press Tab and check that it shows the time you want before you click Save.

Why it matters

The duration is the estimated or billed hours for the job. On hourly labor it sets the labor charge (hours × rate), and it is the billed hours used on the mechanic Efficiency report. A 12-hour job saved as 0:12 bills 12 minutes. See Service Templates — Important Notes & FAQ for how duration and pricing work together.

Other ways shops ask this question

  • I typed 12 hours and it shows 0:12.

  • Why does my labor time change when I type it in?

  • How do I put 10 hours or more on a service template?

  • Duration shows minutes instead of hours.

  • I entered 400 and it turned into 6:40.

  • How do I enter an hour and a half for estimated time?

  • The estimated hours on my job are wrong after I saved.

Related

Did this answer your question?