Skip to main content

Service Templates — Checklist (Template)

How the Check List works, how it looks on the service order, and what blocks completion.

Written by Vladimir

Checklist (Template)

The Check List is a list of tasks that must all be checked off before the service item can be marked complete. Use it to make sure technicians never skip a step. Add tasks with + New Task (marker 3); drag the handle to reorder them.

Example — a Full Service Oil Change for $250 fixed (marker 1) with three required tasks (marker 2): "Drain old oil and refill with new oil", "Replace oil filter and fuel filters", "Grease chassis and check tire pressure".

How it looks on the service order: the service item gets a Checklist dropdown showing progress (for example 0/3). Opening it shows the tasks with checkboxes:

What happens if you try to complete the service item with unchecked tasks: the item will NOT complete. The unchecked tasks are highlighted in yellow (marker 1) and a warning appears: "Not all tasks have been completed yet" (marker 2).

Once all tasks are checked (3/3), each check-off is recorded in the activity history with who did it and when, and the Complete button works:


More in the Service Template guide:

Did this answer your question?