Skip to main content

Permission: Delete Services

What the Delete Services permission turns on, where the Archive button actually is, what the archive dialog asks, and what it does not gate.

Written by Vladimir

What does Delete Services do?

Delete Services lets the user archive a whole work order, and restore an archived one. The app's own wording: "Delete services and view archived ones."

⚠️ You have to open the service first. There is no archive option in the ⋮ menu on the services list — that menu only ever holds Duplicate, with this permission on or off. The control is the red Archive button in the header of the service page itself.

So Delete Services adds exactly two things:

  • The red Archive button on a service that has not been finalized, to the right of Edit

  • The orange Restore button on an already-archived service

What archiving actually does

Pressing Archive opens a dialog headed Archive Service #NNNN. It is not a simple "are you sure":

  • Reason for archiving — required. You cannot archive without typing one.

  • If the job has special-order parts on it, it says so — "This service contains 1 special order part(s)" — and makes you choose where those parts go: Send to Returns Page (they appear on the returns page) or Return to Inventory (they go back into stock).

  • A warning spells out the consequences: "Archiving this service will remove all service items, return all parts, and mark the service as canceled. This action can be undone by restoring the service, but parts will not be automatically restored."

  • Then Cancel or Archive Service.

Afterwards the service shows an Archived badge next to its number, a DELETED date in the header, and a status of Canceled in any list it appears in. Its items and buttons are gone.

⚠️ Restoring brings the service back but not the parts. That is the app's own warning, and it is the reason to be careful: the work order comes back, the parts do not come back onto it. If you restore something you will have to put the parts on again by hand.

What Delete Services needs first

Delete Services needs a way to open a service — normally View On Site Services. Archiving is done from the service page, so the user has to be able to reach one.

What Delete Services does NOT give, and does NOT gate

Delete Services stops short of the following:

  • Delete Services does not change the services list at all — not the ⋮ menu, not the Columns picker.

  • ⚠️ It does not gate seeing archived services. Despite the tooltip, a customer's Services tab has an Archived → Include / Only filter that works with this permission off, and the archived jobs list normally with their Canceled status. What the permission withholds is the Restore button, not the view.

  • No editing. Changing the service is Create and Edit Services; changing the work inside it is Edit Service Items.

  • It does not delete a single service item — that is Delete Service Items.

  • It does not reopen a finalised service — that is Unlock Services.

⚠️ Give this one out sparingly. Archiving strips the items off the job, moves parts, and cancels the work order in one action. Managers and office staff, yes. The shop floor, almost never.

Where to turn Delete Services on or off

Delete Services is set per user, in these steps:

  1. Go to Settings → System → Users.

  2. Click the user.

  3. Open Services → Actions → Delete Services.

  4. Click Save.

The change applies to that user only, and takes effect the next time they load the page.

What the user sees with Delete Services OFF

With Delete Services off, the service header ends at Edit — no Archive.

A service header ending at the Edit button with no red Archive button, because Delete Services is turned off.

And an archived service opens read-only: the Archived badge (1) and the DELETED date (2) are there, but no Restore button.

An archived service open read-only with the Archived badge and the DELETED date marked, and no Restore button, because Delete Services is turned off.

What the user sees with Delete Services ON

With Delete Services on, the red Archive button appears in the service header.

A service header showing the red Archive button to the right of Edit, because Delete Services is turned on.

It opens the archive dialog — reason, where the special-order parts go, and the warning.

The Archive Service dialog with the required Reason for archiving box, the choice of where the special order parts go, and the warning about what archiving removes.

And an archived service now offers Restore.

An archived service showing the orange Restore button in its header, because Delete Services is turned on.

Where to find an archived service

An archived service is found on the customer: open the customer, go to their Services tab, and use the Archived filter — Include to mix them in, Only to see just them (1). They show with a Canceled status (2). This works whether or not the user has Delete Services.

A customer's Services tab with the Archived filter marked and the archived jobs listed with a Canceled status.

There is no shop-wide archived list under the Services menu, and the row ⋮ menu never offers archiving — only Duplicate, in both states.

The three-dot menu on a services list row, offering only Duplicate and no archive option.

Quick answers about Delete Services

Common questions about Delete Services:

  • "I clicked the three dots on the list and there's no delete." → There never is. Open the service and use the red Archive button in the header.

  • "There's no Archive button on the service." → Two different reasons. If the service is finalized — it carries an Invoiced badge and the only button in its header is 🔒 Unlock — there is no Archive button for anybody, whatever their permissions. Unlock the service first and Archive appears. If the service is not finalized and there is still no Archive button, turn on Delete Services.

  • "Where did the archived job go?" → Customer → Services tab → Archived → Only. It will show as Canceled.

  • "I can see archived jobs but can't bring one back." → Viewing is not gated; restoring is. You need Delete Services.

  • "I restored it and the parts are missing." → Expected. The dialog warns that parts are not automatically restored — put them back on by hand.

  • "It won't let me archive." → Reason for archiving is required. Type one.

  • "I want to remove one line, not the whole job." → That is Delete Service Items.

Did this answer your question?